Materials Characterization

Title Publication Date Language Citations
A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading2016/05/01English73
Critical resolved shear stress for slip and twin nucleation in single crystalline FeNiCoCrMn high entropy alloy2017/07/01English73
Effect of a copper filler metal on the microstructure and mechanical properties of electron beam welded titanium–stainless steel joint2012/11/01English73
Microstructural examination and properties of premixed Al–Cu–Mg powder metallurgy alloy2011/07/01English73
Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy2018/11/01English73
Investigation of the phase transformations in Ti 22Al 25Nb alloy2016/04/01English72
Analyzing the scale of the bainitic ferrite plates by XRD, SEM and TEM2016/12/01English72
Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel2008/10/01English72
Correlation between mechanical properties and retained austenite characteristics in a low-carbon medium manganese alloyed steel plate2015/08/01English72
Effect of laser power on oxygen and nitrogen concentration of commercially pure titanium manufactured by selective laser melting2018/09/01English72
A model of material flow during friction stir welding2008/09/01English72
Electron microscopy study of direct laser deposited IN7182015/08/01English72
Characterization of concrete surface roughness and its relation to adhesion in repair systems2006/06/01English72
Mechanical behavior and microstructure of Ti20Hf20Zr20Ta20Nb20 high-entropy alloy loaded under quasi-static and dynamic compression conditions2016/01/01English72
Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing2018/04/01English72
Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel2012/12/01English71
A study of physico-chemical and mineralogical properties of Talcher coal fly ash for stowing in underground coal mines2010/11/01English71
Lattice distortion as an estimator of solid solution strengthening in high-entropy alloys2021/02/01English71
Hot deformation characterization of duplex low-density steel through 3D processing map development2015/09/01English71
Enhancing overall tensile and compressive response of pure Mg using nano-TiB2 particulates2014/08/01English71
Influence of the grain size on deleterious phase precipitation in superduplex stainless steel UNS S327502009/03/01English71
Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying2016/10/01English70
Effect of cryogenic deformation on microstructure and mechanical properties of 304 austenitic stainless steel2017/11/01English70
Synthesis and characterization of ZnO and Ni doped ZnO nanorods by thermal decomposition method for spintronics application2012/05/01English70
Microstructural development and creep behavior in A286 superalloy2004/05/01English70
Effect of heat input on the microstructure and mechanical properties of tungsten inert gas arc butt-welded AZ61 magnesium alloy plates2009/12/01English70
Microstructural stability and creep properties of die casting Mg–4Al–4RE magnesium alloy2009/10/01English70
Effects of rare earth yttrium on microstructure and properties of Ni–16Mo–7Cr–4Fe nickel-based superalloy2014/09/01English70
Facile synthesis and microwave absorbability of C@Ni–NiO core–shell hybrid solid sphere and multi-shelled NiO hollow sphere2014/11/01English70
Correlation between processing parameters and strain-induced martensitic transformation in cold worked AISI 301 stainless steel2008/11/01English70