Materials Characterization

Title Publication Date Language Citations
Synthesis and characterization of WO3 nanostructures prepared by an aged-hydrothermal method2009/09/01English70
Some features of anisothermal solid-state transformations in alloy 7182010/05/01English70
The influence of quench sensitivity on residual stresses in the aluminium alloys 7010 and 70752012/03/01English70
Mixing and characterisation of 316L stainless steel feedstock for micro powder injection molding2005/03/01English69
Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer2012/06/01English69
The evolution of precipitate crystal structures in an Al-Mg-Si(-Cu) alloy studied by a combined HAADF-STEM and SPED approach2018/08/01English69
The formation mechanisms of interlocked microstructures in low-carbon high-strength steel weld metals2012/05/01English69
Joining aluminum to titanium alloy by friction stir lap welding with cutting pin2012/09/01English69
Exfoliation corrosion of friction stir welded dissimilar 2024-to-7075 aluminum alloys2019/01/01English69
Microstructure evolution and mechanical properties of nano-SiCp/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP)2016/11/01English69
Microstructure and intergranular corrosion resistance evaluation of AISI 304 steel for high temperature service2008/05/01English69
The influence of reaction layer on the strength of aluminum/steel joint welded by resistance spot welding2009/02/01English69
The role of molybdenum additions and prior deformation on acicular ferrite formation in microalloyed Nb–Ti low-carbon line-pipe steels2008/06/01English69
Quantitative characterization of porosity in stainless steel LENS powders and deposits2006/07/01English69
Wear and mechanical properties of carbon fiber reinforced copper alloy composites2009/05/01English68
Deformation induced martensitic transformation in a 201 modified austenitic stainless steel2009/08/01English68
Effects of deformation on microstructure and mechanical properties of a Cu–Al–Ni shape memory alloy2008/07/01English68
Corrosion resistance characterization of porous alumina membrane supports2011/04/01English68
Effect of solution annealing temperature on precipitation in 2205 duplex stainless steel2012/12/01English68
Microstructural characterization and mechanical properties of high power ultrasonic spot welded aluminum alloy AA6111–TiAl6V4 dissimilar joints2014/11/01English68
The precipitation and transformation of secondary carbides in a high chromium cast iron2006/01/01English68
Effects of Si content on the microstructure of modified-HP austenitic steels1993/06/01English68
The strengthening effects of relatively lightweight AlCoCrFeNi high entropy alloy2019/05/01English68
Study on the nucleation and growth of M23C6 carbides in a 10% Cr martensite ferritic steel after long-term aging2016/01/01English68
Ultrahigh strength nano/ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment2015/12/01English67
Structural properties of quartz and their potential role for ASR2004/11/01English67
Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing2008/12/01English67
Effect of cold rolling on recrystallization and tensile behavior of a high-Mn steel2016/02/01English67
In-depth quantitative analysis of the microstructures produced by Surface Mechanical Attrition Treatment (SMAT)2013/09/01English67
Comparison of Mercury Intrusion Porosimetry and multi-scale X-ray CT on characterizing the microstructure of heat-treated cement mortar2020/02/01English67