Title	Publication Date	Language	Citations
Improvement of Residual Stress in Gear Using Water Peening by a Cavitation Jet Technique	2002/08/07		4
Advantages and Limitations of HPT: A Review	2008/06/01		4
Medical Uses of Nitinol	2000/01/05		4
SiC Crystal Growth by HTCVD	2004/06/01		4
Surface Nanocrystallization by Surface Mechanical Attrition Treatment	2008/04/01		4
Development of Properties during Secondary Ageing of Aluminium Alloys	2003/08/15		4
Characterization of 4H-SiC MOSFETs Formed on the Different Trench Sidewalls	2006/10/01		4
Silicon Spheroidization Treatment of Thixoformed Al-Si-Mg Alloys	2002/07/30		4
Long-Term Heat Treatments on Ti6Al4V-SiC<sub>f</sub> Composite. Part II - Mechanical Characterization	2008/10/01		4
Influence of the Primary Recrystallization Texture on Abnormal Grain Growth of Goss Grains in Grain Oriented Electrical Steels	2002/08/20		4
Interfacial Forces and Energies Relevant to Production of Metal Matrix Composites	2000/01/01		4
Thick Epitaxial Layers Growth by Chlorine Addition	2009/03/01		4
AlON/SiO<sub>2</sub> Stacked Gate Dielectrics for 4H-SiC MIS Devices	2009/03/01		4
Thermomechanically Hot Rolled High and Ultra High Strength Steel Grades - Processing, Properties and Application	2005/11/01		4
An Upper Bound Solution for Upsetting of Two-Layer Cylinder	2006/01/15		4
Flash Lamp Supported Deposition of 3C-SiC (FLASiC) – a Promising Technique to Produce High Quality Cubic SiC Layers	2004/06/01		4
The Effect of Grain Size on the Mechanical and Cavitation Resistance of a High Nitrogen and Low Nickel Austenitic Stainless Steel	2003/08/15		4
Influence of Basal Plane Dislocation Induced Stacking Faults on the Current Gain in SiC BJTs	2006/10/01		4
E9: The New High-Resolution Neutron Powder Diffractometer at the Berlin Neutron Scattering Center	2001/10/10		4
Titanium Powder Sintering for Preparation of a Porous FGM Destined as a Skeletal Replacement Implant	1999/05/01		4
Evolution of Basal Plane Dislocations during 4H-SiC Epitaxial Growth	2008/09/01		4
Design of Macroporous Biodegradable Polymer Scaffolds for Cell Transplantation	1997/09/01		4
Optical Investigation of Stacking Faults and Micro-Crystalline Inclusions In-Low-Doped 4H-SiC Layers	2004/06/01		4
Advanced Numerical Simulation of Metal Forming Processes Using Adaptive Remeshing Procedure	2009/03/01		4
Evaluation of Mechanical Properties and Microstructure of a High Carbon-Vanadium Tool Steel Produced by Powder Metallurgy	2006/11/01		4
Hydrostatic Extrusion of Magnesium: Process Mechanics and Performance	2003/08/15		4
Long-Length Ultrafine-Grained Titanium Rods Produced by ECAP-Conform	2008/06/01		4
Desorption Behaviour in Nanostructured MgH<sub>2</sub>-Co	2006/07/01		4
A 13 kV 4H-SiC n-Channel IGBT with Low R<sub>diff,on </sub>and Fast Switching	2008/09/01		4
Performance of 60 A, 1200 V 4H-SiC DMOSFETs	2009/03/01		4