Title	Publication Date	Language	Citations
Application of the Quenching and Partitioning (Q&P) Process to a Medium-Carbon, High-Si Microalloyed Bar Steel	2003/08/15		4
The Art of Developing New Magnesium Alloys for High Temperature Applications	2003/03/15		4
Novel Technique for Joining of Thick Section Difficult-to-Weld Aluminium Alloys	2006/07/01		4
Effect of Equal-Channel Angular Pressing (ECAP) on Creep in Aluminium Alloys	2007/03/15		4
Growth of Faceted Free-Spreading SiC Bulk Crystals by Sublimation	2003/09/01		4
Epitaxial Layers Grown with HCl Addition: A Comparison with the Standard Process	2006/10/01		4
Solid Solution Formation Criteria for High Entropy Alloys	2007/10/01		4
Silicon Carbide Crystal and Substrate Technology: A Survey of Recent Advances	2004/06/01		4
Epitaxial Deposition of Silicon Carbide Films in a Horizontal Hot-Wall CVD Reactor	2005/05/01		4
A New High Current Gain 4H-SiC Bipolar Junction Transistor with Suppressed Surface Recombination Structure: SSR-BJT	2009/03/01		4
Aluminium Structures Used in Aerospace - Status and Prospects-	1997/01/01		4
Reliability of 4H-SiC(000-1) MOS Gate Oxide Using N<sub>2</sub>O Nitridation	2009/03/01		4
Improving Ductility in Nanostructured Materials and Metallic Glasses: “Three Laws”	2009/11/01		4
Incommensurate and Commensurate Structural Modulation in Martensitic Phases of FSMA	2009/12/01		4
Analysis of the Formation Conditions for Large Area Epitaxial Graphene on SiC Substrates	2010/04/01		4
Measurement of Solute Profiles by Means of Synchrotron X-Ray Radiography during Directional Solidification of Al-4 wt% Cu Alloys	2010/05/01		4
Performance, Reliability, and Robustness of 4H-SiC Power DMOSFETs	2010/04/01		4
Iron Distribution in Geopolymer with Ferromagnetic Rich Precursor	2010/03/01		4
Novel Physical Simulation Technique Development for Multistage Metal Plastic Deformation Processing	2013/07/01		4
Thin Strip Profile Control Capability of Roll Crossing and Shifting in Cold Rolling Mill	2013/11/15		4
Graphite Morphology's Influence on Shot Peening Results in Cast Irons	2013/09/01		4
Influence of Shot Peening Parameters on Residual Stresses in Flake and Vermicular Cast Irons	2013/09/01		4
Peculiarities of Weld Seams and Adjacent Zones Structures Formed in Process of Explosive Welding of Sheet Steel Plates	2011/01/01		4
The Improving of the Process of the Iron, the Cast Iron and the Copper Powder Mixing	2011/01/01		4
Determination of Material/Geometry of the Section Most Adequate for a Static Loaded Beam Subjected to a Combination of Bending and Torsion	2012/11/12		4
Photo Voltaic Properties of Ag<sub>2</sub>O/ Si Heterojunction Device: Effect of Substrate Conductivity	2020/07/01		4
Consideration of Thermodynamic Processes Formation of Compressed-Air Foam in Design Compressed Air Foam Systems	2020/08/01		4
Epoxidized Dinaphthol Application as the Basis for Binder with Advanced Carbonation Level to Reducing its Flammability	2020/08/01		4
Design and Research of Eco-Friendly Polymer Composites	2020/08/01		4
Methodology for Calculating the Technical State of a Reinforced-Concrete Fragment in a Building Influenced by High Temperature	2020/08/01		4