Materials Characterization

Titel Veröffentlichungsdatum Sprache Zitate
Influence of porosity and relative humidity on consolidation of dolostone with calcium hydroxide nanoparticles: Effectiveness assessment with non-destructive techniques2010/02/01English104
Galvanised steel to aluminium joining by laser and GTAW processes2008/12/01English104
The effect of scandium addition on microstructure and mechanical properties of Al–Si–Mg alloy: A multi-refinement modifier2015/12/01English103
The liquation cracking behavior of IN738LC superalloy during low power Nd:YAG pulsed laser welding2012/05/01English102
Characterization and strengthening effects of γ′ precipitates in a high-strength casting Mg-15Gd-1Zn-0.4Zr (wt.%) alloy2017/04/01English102
A Raman spectroscopic study of C-type rare earth sesquioxides2008/04/01English102
The effect of Ce4+ incorporation on structural, morphological and photocatalytic characters of ZnO nanoparticles2014/11/01English102
Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys2014/10/01English101
Effects of heat input on microstructure and tensile properties of laser welded magnesium alloy AZ312008/10/01English101
Crystallography and metallography of carbides in high alloy steels2008/07/01English101
Single-phase high-entropy alloys – A critical update2020/04/01English101
Effect of zirconium addition on the impact toughness of the heat affected zone in a high strength low alloy pipeline steel2008/02/01English101
Development of nanocomposites based on hydroxyapatite/sodium alginate: Synthesis and characterisation2011/05/01English100
Elastic modulus of phases in Ti–Mo alloys2015/08/01English100
Microstructures and mechanical properties of Ti–Mo alloys cold-rolled and heat treated2011/10/01English100
Effect of Al content on structure and mechanical properties of the AlxCrNbTiVZr (x=0; 0.25; 0.5; 1) high-entropy alloys2016/11/01English99
Synthesis and spectroscopic characterization of nanostructured anatase titania: A photocatalyst2007/06/01English99
Creep effects in nanoindentation of hydrated phases of cement pastes2009/09/01English99
Microstructure of adiabatic shear bands in Ti6Al4V2013/01/01English97
Static recrystallization kinetics of a heavily cold drawn AZ31 magnesium alloy under annealing treatment2011/03/01English97
Diffusion bonding of 410 stainless steel to copper using a nickel interlayer2010/06/01English97
Analysis of laser beam weldability of Inconel 738 superalloy2010/05/01English97
Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy2019/04/01English97
Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy2009/05/01English97
High resolution electron energy loss spectroscopy of manganese oxides: Application to Mn3O4 nanoparticles2010/11/01English97
Mechanical properties of Sn–Zn lead-free solder alloys based on the microstructure array2010/02/01English97
Microstructure and wear characterization of aluminum matrix composites reinforced with industrial waste fly ash particulates synthesized by friction stir processing2016/08/01English96
Effect of cooling rate on microstructure evolution during α/β heat treatment of TA15 titanium alloy2012/08/01English96
Microstructural characterization of hydrogen induced cracking in TRIP-assisted steel by EBSD2016/02/01English96
Acicular ferritic microstructure of a low-carbon Mn–Mo–Nb microalloyed pipeline steel2005/05/01English96