Materials Characterization

Titel Veröffentlichungsdatum Sprache Zitate
Phase transformation and mechanical behavior in annealed 2205 duplex stainless steel welds2008/04/01English194
Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment2018/09/01English192
Long-term creep behavior of 9–12%Cr power plant steels2003/08/01English191
Ultrafine-grain metals by severe plastic deformation2014/06/01English190
Evaluation of microstructural development in electron beam melted Ti-6Al-4V2012/03/01English189
Microstructures in friction-stir welded dissimilar magnesium alloys and magnesium alloys to 6061-T6 aluminum alloy2004/03/01English187
Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature2009/06/01English185
Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds2011/04/01English185
Influences of post-weld heat treatment on tensile properties of friction stir-welded AA6061 aluminum alloy joints2008/09/01English180
Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents2016/03/01English180
Qualitative and quantitative analysis of σ and χ phases in 2205 duplex stainless steel2006/06/01English179
Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures2018/03/01English179
Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment2016/04/01English177
Microstructure of selective laser melted nickel–titanium2014/08/01English173
Atom probe tomography2009/06/01English173
Reconstruction of parent grains from EBSD data2006/12/01English172
Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM)2017/09/01English169
Influence of microstructure on the corrosion resistance of the duplex stainless steel UNS S318032008/08/01English161
Chi-phase precipitation in a duplex stainless steel2009/11/01English158
Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting2018/02/01English154
Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy2018/09/01English153
Study of physical properties of cobalt oxide (Co3O4) nanocrystals2010/05/01English153
The application of focused ion beam microscopy in the material sciences2009/01/01English151
X-ray peak broadening analysis of AA 6061100−x−xwt.% Al2O3 nanocomposite prepared by mechanical alloying2011/07/01English151
Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM)2018/09/01English151
Potential of Jamaican banana, coconut coir and bagasse fibres as composite materials2008/09/01English150
Mechanical properties and shape memory of porous nitinol1994/04/01English144
Quantification of the residual mortar content in recycled concrete aggregates by image analysis2009/07/01English144
Effects of Ni modified MWCNTs on the microstructural evolution and shear strength of Sn-3.0Ag-0.5Cu composite solder joints2020/05/01English144
Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations2015/03/01English142