International Journal of Refractory Metals and Hard Materials

Titel Veröffentlichungsdatum Sprache Zitate
Size-controlled synthesis of nano Mo powders via reduction of commercial MoO3 with carbon black and hydrogen2019/04/01English52
Crack suppression in additively manufactured tungsten by introducing secondary-phase nanoparticles into the matrix2019/02/01English52
Mapping of mechanical properties at microstructural length scale in WC-Co cemented carbides: Assessment of hardness and elastic modulus by means of high speed massive nanoindentation and statistical analysis2018/09/01English52
Hard coatings based on thermal spray and laser cladding2009/03/01English51
Influence of Ni content on microstructure of W–Ni alloy produced by selective laser melting2014/07/01English51
Dry sliding wear behavior of PVD TiN, Ti55Al45N, and Ti35Al65N coatings at temperatures up to 600°C2013/11/01English51
Boron suboxide ultrahard materials2013/07/01English51
Hot pressing of tungsten carbide with and without sintering additives2014/03/01English51
Enhanced liquid-phase sintering of W–Cu composites by liquid infiltration2014/03/01English51
Cutting performances, mechanical property and microstructure of ultra-fine grade Ti(C,N)-based cermets2006/11/01English51
Mechanochemical synthesis of nanocomposite powder for ultrafine (Ti, Mo)C–Ni cermet without core-rim structure2004/07/01English51
Structure and properties of selected (Cr–Al–N, TiC–C, Cr–B–N) nanostructured tribological coatings2010/01/01English51
Characterisation of thermally degraded polycrystalline diamond2015/01/01English51
Progress, challenges and potentials/trends of tungsten-copper (W Cu) composites/pseudo-alloys: Fabrication, regulation and application2021/11/01English51
Preparing nano-crystalline rare earth doped WC/Co powder by high energy ball milling2006/11/01English51
In-situ synthesis of WC–Co composite powder and densification by sinter-HIP2010/09/01English51
Effect of tungsten content on microstructure and quasi-static tensile fracture characteristics of rapidly hot-extruded W–Ni–Fe alloys2012/01/01English51
Effect of interlayers on the structure and properties of TiAlN based coatings on WC-Co cemented carbide substrate2013/03/01English50
Growth and characterization of integrated nano- and microcrystalline dual layer composite diamond coatings on WC–Co substrates2013/03/01English50
The role of tungsten in the Co binder: Effects on WC grain size and hcp–fcc Co in the binder phase2015/03/01English50
Formation of B-modified MoSi2 coating on pure Mo prepared through HAPC process2014/07/01English50
Effect of nano-scale textures on cutting performance of WC/Co-based Ti55Al45N coated tools in dry cutting2015/07/01English50
The effect of increasing V content on structure, mechanical and tribological properties of arc evaporated Ti–Al–V–N coatings2009/03/01English50
Study on the oxidation of WC-Co cemented carbide under different conditions2021/01/01English50
Ductilisation of tungsten (W): On the increase of strength AND room-temperature tensile ductility through cold-rolling2017/04/01English50
Performance of TiN and TiAlN coated micro-grooved tools during machining of Ti-6Al-4V alloy2017/01/01English50
Experimental investigation on tool wear characteristics of PVD and CVD coatings during face milling of Ti 6242S and Ti-555 titanium alloys2020/01/01English50
Preparation and characterization of Mo/Al2O3 composites2016/01/01English50
Effect of porosity on hardness of Al2O3–Y3Al5O12 ceramic composite2015/01/01English50
The oxidation behavior of high Cr and Al containing Nb-Si-Ti-Hf-Al-Cr alloys at 1200 and 1250 °C2017/12/01English50