International Journal of Refractory Metals and Hard Materials

Titel Veröffentlichungsdatum Sprache Zitate
Taguchi analysis on the effect of hot pressing parameters on density and hardness of zirconium diboride2015/05/01English57
The effect of graphene reinforcement on the mechanical properties of Al2O3 ceramics rapidly sintered by high-frequency induction heating2015/01/01English57
Microstructure and mechanical properties of TiB2–SiC ceramic composites by Reactive Hot Pressing2014/01/01English57
A comparison of low-pressure CVD synthesis of diamond and c-BN1996/01/01English57
Investigation of stress-strain response, microstructure and texture of hot deformed pure molybdenum2018/06/01English56
Effect of C and milling parameters on the synthesis of WC powders by mechanical alloying2010/03/01English56
Improving tribological performance of cemented carbides by combining laser surface texturing and W-S-C solid lubricant coating2018/04/01English56
Cold rotary swaging of a tungsten heavy alloy: Numerical and experimental investigations2016/12/01English56
Effect of V, Cr and Mn additions on the microstructure of WC–Co2009/09/01English56
Contact fatigue behavior of PVD-coated hardmetals2009/03/01English56
Corrosion and wear behavior of thermally sprayed nano ceramic coatings on commercially pure Titanium and Ti–13Nb–13Zr substrates2010/01/01English56
Mechanical properties and microstructure of TiB2–TiC composite ceramic cutting tool material2012/11/01English56
Effect of secondary carbides addition on the microstructure and mechanical properties of (Ti, W, Mo, V)(C, N)-based cermets2011/09/01English56
Effects of Y2O3 addition on microstructures and mechanical properties of WC–Co functionally graded cemented carbides2015/05/01English56
Densification mechanism and mechanical properties of tungsten powder consolidated by spark plasma sintering2016/12/01English56
Effects of Cr3C2 additions on the densification, grain growth and properties of ultrafine WC–11Co composites by spark plasma sintering2008/07/01English56
Analytical investigations concerning the wear behaviour of cutting tools used for the machining of compacted graphite iron and grey cast iron2008/05/01English56
Preparation and sintering of WC–Co composite powders for coarse grained WC–8Co hardmetals2014/07/01English55
Investigation of microstructure and mechanical properties of W–Y and W–Y2O3 materials fabricated by powder metallurgy method2015/05/01English55
Hardness of hexagonal AlB2-like diborides of s, p and d metals from semi-empirical estimations2013/01/01English55
Investigation on the characteristics of micro- and nano-structured W-15wt.%Cu composites prepared by powder metallurgy route2012/01/01English55
Thermal properties of W–Cu composites manufactured by copper infiltration into tungsten fiber matrix2014/09/01English55
Hard transparent AlON ceramic for visible/IR windows2013/07/01English55
Microstructure and properties of laser cladded B4C/TiC/Ni-based composite coating2020/01/01English55
Abrasion of tungsten carbide hardmetals using hard counterfaces2006/01/01English55
Taguchi method assisted optimization of electrochemical synthesis and structural characterization of copper tungstate nanoparticles2015/07/01English55
Microstructure, mechanical behaviour and fracture of pure tungsten wire after different heat treatments2017/11/01English54
Microstructural evolution during silicon carbide (SiC) formation by liquid silicon infiltration using optical microscopy2010/03/01English54
Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten–steel joint using a V/Cu composite barrier interlayer2015/01/01English54
Wear properties of sintered WC-12%Co processed via Binder Jet 3D Printing (BJ3DP)2019/01/01English54