IEEE Transactions on Energy Conversion

Titel Veröffentlichungsdatum Sprache Zitate
Influence of design parameters on cogging torque in permanent magnet machines2000/01/01430
Methodology for optimally sizing the combination of a battery bank and PV array in a wind/PV hybrid system1996/06/01413
Generation unit sizing and cost analysis for stand-alone wind, photovoltaic, and hybrid wind/PV systems1998/03/01257
A mathematical model for lead-acid batteries1992/03/01236
Probabilistic performance assessment of autonomous solar-wind energy conversion systems1999/01/01213
Wind power forecasting using advanced neural networks models1996/01/01189
Unit sizing and control of hybrid wind-solar power systems1997/03/01188
Noninvasive detection of broken rotor bars in operating induction motors1988/01/01181
Optimum photovoltaic array size for a hybrid wind/PV system1994/01/01181
Transient analysis of cage induction machines under stator, rotor bar and end ring faults1995/06/01179
A decision support technique for the design of hybrid solar-wind power systems1998/03/01170
Branch-and-bound scheduling for thermal generating units1993/06/01161
Neural network based estimation of maximum power generation from PV module using environmental information1997/01/01159
Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages2001/01/01155
Identification of optimal operating point of PV modules using neural network for real time maximum power tracking control1995/06/01142
A sequential simulation technique for adequacy evaluation of generating systems including wind energy1996/01/01140
Analysis and performance assessment of the active frequency drift method of islanding prevention1999/01/01139
Detection and location of interturn short circuits in the stator windings of operating motors1994/01/01138
Control design and dynamic performance analysis of a wind turbine-induction generator unit2000/03/01135
Source of induction motor bearing currents caused by PWM inverters1996/03/01133
Reliability/cost implications of PV and wind energy utilization in small isolated power systems2001/01/01133
A new approach to direct torque control of induction motor drives for constant inverter switching frequency and torque ripple reduction2001/01/01132
Determining the relative effectiveness of islanding detection methods using phase criteria and nondetection zones2000/01/01131
Photovoltaic module-site matching based on the capacity factors1995/06/01126
Wind speed and power forecasting based on spatial correlation models1999/01/01125
Steady-state performance of a grid-connected rooftop hybrid wind-photovoltaic power system with battery storage2001/03/01125
Linear electric actuators and generators1999/01/01121
Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's vector approach1999/01/01118
Using neural networks to estimate wind turbine power generation2001/01/01117
Modeling and performance of microscale thermophotovoltaic energy conversion devices2002/03/01114