International Journal of Fatigue

Titel Veröffentlichungsdatum Sprache Zitate
Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting2018/12/01English138
Probabilistic framework for multiaxial LCF assessment under material variability2017/10/01English138
Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces2017/08/01English137
An engineering model of fatigue crack growth under variable amplitude loading2008/01/01English136
Very high cycle fatigue measuring techniques2014/03/01English136
A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy2020/07/01English135
Cracks on Mixed Mode loading – Theories, experiments, simulations2014/05/01English134
Effect of residual stresses on the fatigue behaviour of welded joints depending on loading conditions and weld geometry2009/01/01English134
Generation and use of standardised load spectra and load–time histories2005/08/01English134
Fatigue strengthening of damaged metallic beams using prestressed unbonded and bonded CFRP plates2012/11/01English134
Cyclic response and inelastic strain energy in low cycle fatigue1984/01/01English134
A comprehensive investigation on the effects of laser and shot peening on fatigue crack growth in friction stir welded AA 2195 joints2009/05/01English134
Additive manufacturing in the context of structural integrity2017/01/01English133
The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T62004/09/01English133
Comparative assessment of dissipated energy and other fatigue criteria☆2007/09/01English133
What is fatigue damage? A view point from the observation of low cycle fatigue process2005/08/01English133
Evaluation of low cycle fatigue life in AZ31 magnesium alloy2007/09/01English131
Tensile fatigue of conventional and negative Poisson’s ratio open cell PU foams2009/03/01English131
Fatigue properties and crack behavior of ultra-fine and nanocrystalline pure metals2009/10/01English130
Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part I: Effect of tensile holding period on fatigue lifetime2008/04/01English130
An experimental evaluation of three critical plane multiaxial fatigue criteria2007/08/01English130
A stored energy criterion for fatigue crack nucleation in polycrystals2014/11/01English129
Multiaxial fatigue life prediction for titanium alloy TC4 under proportional and nonproportional loading2014/02/01English129
Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials2018/07/01English129
Strain energy gradient-based LCF life prediction of turbine discs using critical distance concept2018/08/01English129
Surface characteristics and fatigue behavior of shot peened Inconel 7182018/05/01English129
A fatigue damage model of composite materials2010/01/01English128
Effect of re-filling probe hole on tensile failure and fatigue behaviour of friction stir spot welded joints in Al–Mg–Si alloy2008/10/01English128
The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications2006/10/01English128
Porosity and the fatigue behavior of hypoeutectic and hypereutectic aluminum–silicon casting alloys2008/06/01English128