Titel	Veröffentlichungsdatum	Sprache	Zitate
Damage Investigation in A319 Aluminium Alloy by X‐ray Tomography and Digital Volume Correlation during In Situ High‐Temperature Fatigue Tests	2016/07/06	English	36
Identification of Logarithmic‐Type Creep of Calcium‐Silicate‐Hydrates by Means of Nanoindentation	2009/01/15	English	36
One‐step deposition of nano‐to‐micron‐scalable, high‐quality digital image correlation patterns for high‐strain in‐situ multi‐microscopy testing	2019/08/30	English	35
Fatigue Damage of the Gesso Layer in Panel Paintings Subjected to Changing Climate Conditions	2012/07/15	English	35
Formulation of Lucas–Kanade Digital Image Correlation Algorithms for Non‐contact Deformation Measurements: A Review	2013/07/15	English	35
Fracture‐induced Physical Phenomena and Memory Effects in Rocks: A Review	2005/10/14	English	35
An experimental study of the feasibility of phase‐based video magnification for damage detection and localisation in operational deflection shapes	2020/01/08	English	35
Study on Fracture Behaviour of a Polymer‐Bonded Explosive Simulant Subjected to Uniaxial Compression Using Digital Image Correlation Method	2012/03/02	English	35
Local Energy Approach to Steel Fatigue	2008/07/10	English	34
Analysis of the Residual Stress around a Cold‐expanded Fastener Hole in a Finite Plate	2005/05/01	English	34
Real‐Time Visualisation of the Portevin–Le Chatelier Effect With Mechanoluminescent‐Sensing Film	2011/11/27	English	34
Automated Fast Initial Guess in Digital Image Correlation	2013/09/24	English	33
Study on Failure Characteristic of Rock‐Like Materials With an Open‐Hole Under Uniaxial Compression	2011/09/13	English	33
Ultrasonic Characterisation of Porous Biomaterials Across Different Frequencies	2009/01/15	English	33
Mechanical properties of rock specimens containing pre‐existing flaws with 3D printed materials	2017/08/25	English	33
Image Processing to Estimate the Heat Sources Related to Phase Transformations during Tensile Tests of NiTi Tubes	2007/07/19	English	32
Characterisation of Pressure‐sensitive Yielding in Polymers	2006/07/17	English	32
Shear Modulus Determination of Cuboid Metallic Open‐Lattice Cellular Structures by Analytical, Numerical and Homogenisation Methods	2012/04/27	English	32
A general linear method to evaluate the hardening behaviour of metals at large strain with full‐field measurements	2018/01/24	English	31
The Influence of Vibratory Treatment on the Fatigue Life of Welds: A Comparison with Thermal Stress Relief	2001/11/01	English	31
Cross‐Correlation and Differential Technique Combination to Determine Displacement Fields	2011/12/01	English	31
Mean stress dependence of the thermoelastic constant	1987/02/01	English	31
Effect of Styrene–Butadiene Rubber Latex on Mechanical Properties of Cementitious Materials Highlighted by Means of Nanoindentation	2011/03/11	English	30
Processing, Microstructure and Mechanical Properties of Air Plasma‐Sprayed Ceria–Yttria Co‐stabilized Zirconia Coatings	2010/09/14	English	30
Fatigue on Shot‐Peened Gears: Experimentation, Simulation and Sensitivity Analyses	2010/07/14	English	30
Curvature determination in the bending test of continuous fibre reinforcements	2016/11/16	English	30
The Use of a Second Harmonic Correlation to Detect Damage in Composite Structures Using Thermoelastic Stress Measurements	2003/05/01	English	30
Experimental Analysis of the Errors due to Polynomial Interpolation in Digital Image Correlation	2015/04/27	English	30
MEASUREMENT OF NON‐UNIFORM BI‐AXIAL RESIDUAL STRESSES BY THE HOLE DRILLING METHOD	1968/04/01	English	30
Validation of finite‐element models using full‐field experimental data: Levelling finite‐element analysis data through a digital image correlation engine	2020/04/20	English	30