Titel	Veröffentlichungsdatum	Sprache	Zitate
Towards Material Testing 2.0. A review of test design for identification of constitutive parameters from full‐field measurements	2020/09/23	English	64
Assessment of Digital Image Correlation Measurement Accuracy in the Ultimate Error Regime: Main Results of a Collaborative Benchmark	2013/09/24	English	63
Neutron and Synchrotron X‐ray Strain Scanning	2001/02/01	English	62
Characterisation of Contact Pressure Distribution in Bolted Joints	2006/01/30	English	60
Delamination Effect on Bending Behaviour in Carbon–Epoxy Composites	2011/03/11	English	60
Three fringe photoelasticity ‐ use of colour image processing hardware to automate ordering of isochromatics	1996/08/01	English	59
Identification of the Orthotropic Elastic Stiffnesses of Composites with the Virtual Fields Method: Sensitivity Study and Experimental Validation	2007/07/19	English	59
Measurement of Fracture Parameters for a Mixed‐Mode Crack Driven by Stress Waves using Image Correlation Technique and High‐Speed Digital Photography	2009/03/05	English	58
An Evaluation of Convergence Criteria for Digital Image Correlation Using Inverse Compositional Gauss–Newton Algorithm	2013/10/11	English	57
Alternative calibration techniques for quantitative thermoelastic stress analysis	1995/02/01	English	56
Experimental Investigations of Fracture Process Using DIC in Plain and Reinforced Concrete Beams under Bending	2013/10/21	English	56
Accurate Measurement of Satellite Antenna Surface Using 3D Digital Image Correlation Technique	2009/03/05	English	56
Investigation of the Uncertainty of DIC Under Heterogeneous Strain States with Numerical Tests	2012/05/03	English	56
Thermoelasticity for the analysis of crack tip stress fields — a review	1999/05/01	English	55
Mechanical Properties of a Typical Stereolithography Resin	2000/05/01	English	54
Introduction to thermoelastic stress analysis	1999/05/01	English	53
On the Characterisation of Foam and Micro‐lattice Materials used in Sandwich Construction1	2008/01/10	English	53
Impact Tensile Stress–strain Characteristics of Wrought Magnesium Alloys	2003/11/01	English	52
50th Anniversary Article: Effect of Sensor Noise on the Resolution and Spatial Resolution of Displacement and Strain Maps Estimated with the Grid Method	2013/10/25	English	51
Locating the Crack Tip Using Displacement Field Data: A Comparative Study	2012/12/06	English	50
An Understanding of the Width Effect in FRP–Concrete Debonding	2011/03/11	English	49
Modern Photoelasticity for Residual Stress Measurement in Glass	2008/01/10	English	48
Application of a Multi‐Camera Stereo DIC Set‐up to Assess Strain Fields in an Erichsen Test: Methodology and Validation	2013/02/18	English	46
RGB Photoelasticity: Review and Improvements	2010/03/12	English	46
Acoustic Emissions at High and Low Frequencies During Compression Tests in Brittle Materials	2011/12/01	English	46
50th Anniversary Article: The Origin and Management of Residual Stress in Heat‐treatable Aluminium Alloys	2014/04/25	English	45
Adaptive Quality Guided Phase Unwrapping Algorithm for Whole‐Field Digital Photoelastic Parameter Estimation of Complex Models	2010/03/12	English	45
A Comparison Between the EN 383 and ASTM D5764 Test Methods for Dowel‐Bearing Strength Assessment of Wood: Experimental and Numerical Investigations	2010/03/12	English	45
50th Anniversary Article: Comparison Studies of Full Wavefield Signal Processing for Crack Detection	2014/06/25	English	45
Thermographic Analysis of Fatigue Dissipation Properties of Steel Sheets	2007/07/19	English	45