Titel	Veröffentlichungsdatum	Sprache	Zitate
Optimization of Weld Conditions and Alloy Composition for Welding of Single-Crystal Nickel-Based Superalloys	2007/03/15		7
Sublimation-Grown Semi-Insulating SiC for High Frequency Devices	2003/09/01		7
Characterisation and Quantification of Complex Bainitic Microstructures in High and Ultra-High Strength Linepipe Steels	2005/11/01		7
Development of Superplastic Properties in Quasi Single Phase Alloys	2007/07/01		7
Thermodynamics-Based Semi-Empirical Description of the Liquidus Surface and Partition Coefficients in Ternary Al-Mg-Si Alloy	2003/01/01		7
Growth of Crack-Free 100mm-Diameter 4H-SiC Crystals with Low Micropipe Densities	2008/09/01		7
Solution Growth of SiC Crystal with High Growth Rate Using Accelerated Crucible Rotation Technique	2006/10/01		7
Synthesis and Characteristics of Inorganic Polymer Materials Geopolymerized from Ash of Brickyard	2019/07/01		7
Macrosegregation of Alloying Elements in Hot Top of Large Size High Strength Steel Ingot	2016/11/15		7
Destruction Patterns of X70 Steel Sample, Possessing Cracks of Corrosion-Mechanical Origin, under Cyclic Loading	2019/02/01		7
Modeling of Microstructure and Mechanical Properties of Hot Rolled Steels	2013/07/01		7
A Study Wear Behaviour of Induction Hardened 4140 and Carburised 8617H Steels on 1040 Steel	2013/11/15		7
Biological Resistance of Cement Composites Filled with Dolomite Powders	2016/09/01		7
The Manufacturing of the AlSi12-Al<sub>2</sub>O<sub>3</sub> Composite Powder for Additive Production Methods	2016/09/01		7
Demonstration of SiC-MOSFET Embedding Schottky Barrier Diode for Inactivation of Parasitic Body Diode	2017/05/01		7
Consolidation of Titanium, and Ti-6Al-4V Alloy Powders by Powder Compact Forging	2009/04/01		7
4H-SiC Trench MOSFET with Bottom Oxide Protection	2014/02/01		7
Investigation of the Properties of Powder Materials Using Computer Modeling	2021/07/13		7
Investigation of the Processes of Formation of a Fire Retardant Coating	2021/07/13		7
Electrochemical Synthesis of Crystalline Niobium Oxide	2021/07/13		7
The Use of Sol-Gel Method for Obtaining Fire-Resistant Elastic Coatings on Cotton Fabrics	2021/07/13		7
The Fiber-Reinforced Concrete Constructions Experimental Research	2018/09/01		7
Adhesion of <i>Candida</i> to Vanillin-Coated PMMA Resin	2017/11/01		7
Mechanical Properties of Samples of Polyphenylene Sulfone Obtained by the 3D-Printing Method	2018/10/01		7
Modeling the Propagation of Elastic Ultrasonic Waves in Isotropic and Anisotropic Materials when Excited by Various Sources	2019/02/01		7
Influence of SLM Process Parameters on Porosity of Nickel Base Heat Resistance Alloy EP648	2016/02/01		7
Investigation on the Effects of Acetone Vapor-Polishing to Fracture Behavior of ABS Printed Materials at Different Operating Temperature	2020/08/03		7
Characterization of 4H-SiC nMOSFETs in Harsh Environments, High-Temperature and High Gamma-Ray Radiation	2016/05/01		7
Fabrication of Injection Moulded 304L Stainless Steels Reinforced with Tungsten Carbide Particles	2012/01/03		7
Epitaxial Growth on 4H-SiC on-Axis, 0.5°, 1.25°, 2°, 4°, 8° Off-Axis Substrates – Defects Analysis and Reduction	2011/03/01		7