Surface and Coatings Technology

Titel Veröffentlichungsdatum Sprache Zitate
A review comparing cathodic arcs and high power impulse magnetron sputtering (HiPIMS)2014/10/01English195
Diamond-like carbon for magnetic storage disks2004/03/01English194
Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloy2011/12/01English193
Atmospheric pressure plasma deposition of thin films by Townsend dielectric barrier discharge2005/11/01English193
Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel2006/08/01English192
Effects of carbide size and Co content on the microstructure and mechanical properties of HVOF-sprayed WC–Co coatings2007/12/01English192
Electrodeposition of hydroxyapatite onto nanotubular TiO2 for implant applications2006/12/01English191
A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings2005/11/01English189
Cu and CuO nanoparticles immobilized by silica thin films as antibacterial materials and photocatalysts2010/09/01English188
Corrosion resistance and microstructure of electrodeposited nickel–cobalt alloy coatings2006/12/01English187
Ni-W electrodeposited coatings: Characterization, properties and applications2016/12/01English187
TGO growth behaviour in TBCs with APS and HVOF bond coats2008/03/01English186
Fretting wear and friction reduction of CP titanium and Ti–6Al–4V alloy by ultrasonic nanocrystalline surface modification2012/08/01English184
The effect of current mode and discharge type on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloy AJ622011/12/01English184
Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying2010/09/01English184
Abrasive wear behaviour of WC–CoCr and Cr3C2–20(NiCr) deposited by HVOF and detonation spray processes2006/01/01English183
Surface nanocrystallization induced by shot peening and its effect on corrosion resistance of 1Cr18Ni9Ti stainless steel2006/04/01English182
Quantitative measurements of sp3 content in DLC films with Raman spectroscopy2010/12/01English182
Corrosion resistance of Mg–Al-LDH coating on magnesium alloy AZ312014/11/01English182
Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings2006/05/01English180
Characterization of the performance of an intumescent fire protective coating2006/10/01English178
Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: A review2013/08/01English178
Influence of the anodizing temperature on the porosity and the mechanical properties of the porous anodic oxide film2007/05/01English177
High corrosion-resistance nanocrystalline Ni coating on AZ91D magnesium alloy2006/05/01English177
Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings2006/04/01English174
Induction plasma sprayed nano hydroxyapatite coatings on titanium for orthopaedic and dental implants2011/01/01English174
Recent advances in polymer thin films prepared by plasma polymerization Synthesis, structural characterization, properties and applications1996/07/01English173
Thermal spraying of biomaterials2006/10/01English173
Hot corrosion of some superalloys and role of high-velocity oxy-fuel spray coatings—a review2005/08/01English173
Study on the active screen plasma nitriding and its nitriding mechanism2006/12/01English172