Surface and Coatings Technology

Titel Veröffentlichungsdatum Sprache Zitate
Ultrasound-assisted electrodeposition of composite coatings with particles2014/11/01English99
Thermal stability and oxidation resistance of arc evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN coatings2014/11/01English99
Structure, properties, and biomedical performance of osteoconductive bioceramic coatings2013/10/01English99
Deposition of α-Al2O3 hard coatings by reactive magnetron sputtering2004/07/01English99
A comprehensive model of stress generation and relief processes in thin films deposited with energetic ions2006/04/01English99
On the formation of expanded austenite during plasma nitriding of an AISI 316L austenitic stainless steel2006/12/01English99
Organic–inorganic behaviour of HMDSO films plasma-polymerized at atmospheric pressure2009/02/01English99
Effects of surfactants on electrodeposition of nickel-carbon nanotubes composite coatings2008/04/01English99
Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying2020/03/01English98
Laser coatings to improve wear resistance of mould steel2005/04/01English98
Preparation of epoxy microcapsule based self-healing coatings and their behavior2012/07/01English98
The effects of friction-stir process parameters on the fabrication of Ti/SiC nano-composite surface layer2011/12/01English98
About the role of residual stresses and surface work hardening on fatigue ΔKth of a nitrided and shot peened low-alloy steel2008/03/01English98
Glow discharge nitriding of AISI 316L austenitic stainless steel: Influence of treatment pressure2006/05/01English98
Operating parameters for suspension and solution plasma-spray coatings2008/06/01English98
Study on the corrosion resistance of phytic acid conversion coating for magnesium alloys2006/10/01English98
The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al–Al2O3 composites2015/05/01English98
Microstructure, residual stress, and fracture of sputtered TiN films2013/06/01English98
Thermal properties of oxides with magnetoplumbite structure for advanced thermal barrier coatings2008/03/01English98
Plasma nitriding of AISI 304 austenitic stainless steel with pre-shot peening2010/07/01English98
Corrosion resistance of thermally sprayed Al and Al/SiC coatings on Mg2009/07/01English98
Laser surface patterning to enhance adhesion of plasma sprayed coatings2015/09/01English98
Cycle performance improvement of Li-rich layered cathode material Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by ZrO2 coating2013/11/01English98
Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC2012/08/01English98
Characterization and corrosion properties of hydroxyapatite/graphene oxide bio-composite coating on magnesium alloy by one-step micro-arc oxidation method2017/05/01English98
Residual stresses in nitride hard coatings prepared by magnetron sputtering and arc evaporation1995/09/01English98
Pilot scale sonochemical coating of nanoparticles onto textiles to produce biocidal fabrics2009/12/01English98
NANO-motheye antireflection pattern by plasma treatment of polymers2005/10/01English97
Characteristics of thin surface layers of cobalt-based alloys deposited by laser cladding2006/04/01English97
Discharge voltage measurements during magnetron sputtering2006/04/01English97