Titel	Veröffentlichungsdatum	Sprache	Zitate
A note from the editor	1985/06/01	English
Recrystallization of 70 Pct Cu-30 Pct Zn brass by laser irradiation and furnace heating	1981/06/01	English
Progress in plasma carburizing	1980/06/01	English
Prediction of cost optimal gas feed mixtures for carburization	1986/12/01	English
A re-appraisal of nitrocarburising and nitriding when applied to the design and manufacture of non-alloy steel automobile components	1979/12/01	English
Softening high hardenability steels for machining and cold forming	1988/09/01	English
Development of heat treatment parameters to improve fracture toughness and grain size of an embrittled maraging steel	1992/09/01	English
Introduction	1979/12/01	English
Residual stresses in the soft pearlite layer of carburized steel	1980/06/01	English
A scanning auger microscopy characterization of the internal oxidation produced on carburizing	1992/09/01	English
Age hardening in a duplex stainless steel	1983/06/01	English
Characterization of electroslag remelted and ladle refined, electric furnace melted 4340 steel armor	1986/12/01	English
Modeling and parametric studies of heat transfer in a direct-fired batch reheating furnace	1990/09/01	English
Factors affecting the inherent hardenability of steel	1979/12/01	English
Carbide coating process by use of molten borax bath in Japan	1979/12/01	English
The effects of phosphorus and carbon on the hardenability of 41XX type steels	1981/12/01	English
The impregnation of oxygen, sulfur, boron, carbon, and nitrogen into the surface of high-speed steel cutters in a gaseous medium	1983/06/01	English
Relationship between quenching process, hardness depth and quench defects in steels	1980/06/01	English
Calendar … events of interest to JHT readers	1987/03/01	English
Selected abstracts of heat treating literature September 1984–February 1985	1985/06/01	English
Calendar … events of interest to JHT readers	1986/12/01	English
Journal of heat treating newsline … items of interest to JHT readers	1987/03/01	English
Strategies for efficient operation of furnaces using nitrogen-base atmospheres	1982/12/01	English
Announcements	1992/09/01	English
Technical note: The role of Re additions on the grain size and the microstructure of Mo	1988/09/01	English
Correlation of measurements of retained austenite in carburized steels by X-Ray diffraction and quantitative metallography	1980/06/01	English
Induction tempering of steel: Part II. Effect of process variables	1985/06/01	English
Editorial	1987/03/01	English
Toughness and intergranular fracture of a simulated carburized case in EX-24 type steel	1980/06/01	English
Advanced surface modification of steels	1992/09/01	English