Titel	Veröffentlichungsdatum	Sprache	Zitate
Wavelength of Experimental LEDS: Hardness, Elastic Modulus, Degree of Conversion and Temperature Rise of a Microhybrid Composite	2015/04/01		3
Natural Nanotubes Reinforcing Heterophasic Polypropylene	2015/04/01		3
Structural and Mechanical Properties of Radiofrequency Ar-N2 Plasma Nitrided Aluminium	2015/04/01		3
Microhardness and chemical composition of human tooth	2003/06/01		3
Influence of the Testing Gage Length on the Strength, Young's Modulus and Weibull Modulus of Carbon Fibres and Glass Fibres	2002/10/01		3
N2 and CO2 Adsorption by TMA- and HDP-Montmorillonites	2002/10/01		3
Influence of Ni content on physico-chemical characteristics of Ni, Mg, Al-Hydrotalcite like compounds	2003/12/01		3
Use of the pendant drop method to measure interfacial tension between molten polymers	1999/01/01		3
Evaluation of mechanical properties of four different carbon/epoxy composites used in aeronautical field	2005/03/01		3
Analysis of Stress and Fracture Strength of Zirconia Implants after Cyclic Loading	2015/10/01		3
Synthesis and Characterization of New Copolymer Based Cinnamyl Methacrylate Monomer: Determination of Monomer Reactivity Ratio and Statistical Sequence	2015/10/01		3
Microcosm Biofilm Formation on Titanium Surfaces	2015/08/01		3
Melting Temperature and Wetting Angle of AlN/Dy2O3 and AlN/Yb2O3 Mixtures on SiC Substrates	2015/10/01		3
Nucleation and growth during recrystallization	2005/09/01		3
Fracture toughness measurements of LPS-SiC: a comparison of the indentation technique and the SEVNB method	2005/06/01		3
A X-ray study of β-phase and molecular orientation in nucleated and non-nucleated injection molded polypropylene resins	2009/01/01		3
Metronidazole release using natural rubber latex as matrix	2010/03/01		3
Evaluation of the thermal comfort of ceramic floor tiles	2007/09/01		3
Topics in Present-day Science Technology and Innovation: Ultrafast Relaxation Processes in Semiconductors	2015/06/01		3
Hot Consolidation of Partially Amorphous Cu-Ti Based Alloy: a Comparison Between Hot Extrusion and Hot Compaction by Sintering	2015/06/01		3
Numerical investigation of sliding frictional contact in functionally graded steels (FGS)	2014/12/01		3
Pulsed bias effect on crystallinity and nano-roughness of Ti6Al4V-N films deposited by grid assisted magnetron sputtering system	2014/12/01		3
Soil corrosion of the AISI1020 steel buried near electrical power transmission line towers	2014/12/01		3
The Role of cobalt and nickel intermetallic phases on the mechanical properties and microstructure evolution of Al-Zn-Mg-Cu alloys	2014/12/01		3
Microstructural characterization and interactions in Ti- and TiH2-hydroxyapatite vacuum sintered composites	2006/03/01		3
Characterization study of electric arc furnace dust phases	2006/03/01		3
A Short review on wrought austenitic stainless steels at high temperatures: processing, microstructure, properties and performance	2007/12/01		3
Thermal and mechanical properties of PVDF/PANI blends	2010/12/01		3
Low temperature synthesis of magnesium oxide and spinel powders by a sol-gel process	2010/09/01		3
Evaluation of the in vivo biocompatibility of hydroxyapatite granules incorporated with zinc ions	2010/12/01		3