Journal of Materials Science Letters

Title Publication Date Language Citations
Evaluation ofK Ic of brittle solids by the indentation method with low crack-to-indent ratios1982/01/01English18
A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics1983/05/01English15
On the formation of TiAl3 during reaction between solid Ti and liquid Al1997/07/01English6
Temperature dependent studies of cathodoluminescence of green band of ZnO crystals1988/04/01English6
Impact properties of natural fibre composites1987/08/01English5
Role of H2O on the degradation process of Y-TZP1987/04/01English5
Corrections needed in double-cantilever beam tests for assessing the interlaminar failure of fibre-composites1989/02/01English5
Young's modulus of carbon from a mixture of oil palm bunches and latex1995/01/01English5
Dielectric strength of fine grained barium titanate ceramics1996/01/01English4
Potential of polyetheretherketone (PEEK) and carbon-fibre-reinforced PEEK in medical applications1987/02/01English4
Double yield point in polyethylene under tensile loading1990/01/01English4
The effect of microcracks on the elastic moduli of brittle materials1985/12/01English4
Investigation of failures in stainless steel orthopaedic implant devices: pit-induced stress corrosion cracking1992/01/01English4
The role of silica in sintering barium ferrite1989/12/01English4
Sialon ceramics by the hot isostatic press encapsulation method1991/01/01English3
A calorimetric study of precipitation in commercial aluminium alloy 60611991/01/01English3
Zinc oxide thin films prepared by chemical vapour deposition from zinc acetate1992/01/01English3
Hot-pressed Si3N4-32% SiC nanocomposite from amorphous Si-C-N powder with improved strength above 1200 �C1991/01/01English3
Thermal decomposition of hydroxyapatite structure induced by titanium and its dioxide1994/01/01English3
Fabrication of silicon nitride nano-ceramics by spark plasma sintering1995/01/01English3
Engineering ductile fracture in brittle-matrix composites1993/01/01English3
Effect of frequency of pulsing in gas tungsten arc welding on the microstructure and mechanical properties of titanium alloy welds: A technical note1996/01/01English2
Structure of C-B4C-SiC composites with silicon additive1996/01/01English2
Air-cured bamboo pulp reinforced cement1994/01/01English2
Characterization of fracture toughness of renal calculi using a microindentation technique1993/01/01English2
Preparation of fibre-like silicon nitride from silicon powder1993/01/01English2
Preparation of carbide fibres by thermal decomposition of cellulose-metal (Ti, Zr) alkoxide gel fibres1994/01/01English2
Thermodynamic stability of yttrium carbide at high temperature1993/01/01English2
Reactive diffusion between titanium and stainless steel1993/01/01English2
Subsurface damage in single-crystal silicon due to grinding and polishing1996/01/01English2