Journal of the Korean Institute of Resources Recycling

Title Publication Date Language Citations
Separation of Enamel from the Enamel Coated Coper Wires Via High Frequency Induction Process2012/06/30English
Analysis of Mechanical Properties and Micro structure of Fly Ash Based Alkali-activated Mortar2012/06/30English
The Selective Removal of Sb and Pb from Molten Bi-Pb-Sb Alloy by Oxidation2012/08/31English
Development of Microbubble Flotation Technique for the Production of High Grade Coal2012/08/31English
The Survey on Froth Floatation of Low Grade Copper Ore from the Australia2016/12/30English
Effect of Nozzle Tip Size on the Preparation of Nano-Sized Cobalt Oxide Powder by Spray Pyrolysis Process2016/12/30English
Spherodization of Granuled Cr2O3Fine Ceramic Powder by Plasma Spray2016/12/30English
Effects of Crushed Coal Bottom Ash on the Properties of Mortar with Various Water-to-binder Ratios2016/12/30English
A Study on the Environmental Review through the Life Cycle Assesment Method of End-of-life Vehicle Dismantling Technology Via Indoor Rail Type2016/12/30English
Manufacture of Dismantling Apparatus for Waste CPU Chip and Performance Evaluation2016/12/30English
Influence of pH on Leaching Behavior of Phosphorous from Steelmaking Slag2016/12/30English
A Selective Recovery Condition of Vanadium from Fly Ash Leach Liquor by UV-Spectrophotometry2016/12/30English
Trends of Recycling Technologies in Utilization of Coal Combustion Byproducts for Manufacturing Geopolymers through Patent and Literature Analysis2014/04/30English
Trend on the Recycling Technologies on the High-efficiency Rapid Cooling Method of Ladle Furnace Slag by the Patent and Paper Analysis2014/04/30English
The Influence of Thermal Condition on the Variation of Reaction Product Composition depending on the Constituent of Dolomite in the Absorption Process of SO2by Dolomite2014/04/30English
Effect of Microwave and High-temperature Heating Methods on Contaminates Removal from Oil-contaminated Soil by Heat Treatment2014/04/30English
Technical Trends of Rare Metal Recycling in the Next Generation Automobile2014/04/30English
Copper Solubility in Al2O3-CaO-SiO2-MgO Slag2014/02/28English
The Optimization of Hydrometallurgical Process for Recovery of Zinc from Electric Arc Furnace Dust (Part I : leaching process)2015/06/30English
An Electrochemical Evaluation of the Corrosion Properties of the Steel with the Type and the Thickness of Metallizing Coatings2016/06/30English
Promoting Resources Efficiency in the Life-cycle of Resource for Sustainable Resource Management2015/04/30English
Effect of Gypsum on Hydration Properties of Natural Hydraulic Lime2015/02/28English
A Study on the Improvement of Property of Concrete using Copper Slag and Fly ash2015/02/28English
Distribution Behavior of Ni between CaO-SiO<sub>2</sub>-Al<sub>2</sub>O<sub>3</sub>-MgO Slag and Cu-Ni Alloy2015/02/28English
Economic and Technological Feasibility Study on Pre- and Post-Consumer Recycling of Disposable Diaper in Korea2015/02/28English
A study on the Characteristic of Waste Ground Rubber Tire Powders with Pre-treatment Process for Recycling2015/04/30English
Overview and Recycling of Waste Automobile Glass2015/02/28English
Characteristics of Heat Recovery Rate and Fouling according to Structures and Materials in Heat Exchangers2015/04/30English
Optimum Mix of Extrusion panel Using Low Energy Curing Admixture (LA) based on Ground Granulated Blast-Furnace Slag and Ladle Furnace Slag2015/04/30English
Dissolution and Removal of Silicates in Acid Leaching Process2015/02/28English