Applications in Energy and Combustion Science

Title Publication Date Language Citations
Recent development of biomass gasification for H2 rich gas production2022/06/01English20
The role of combustion science and technology in low and zero impact energy transformation processes2021/09/01English14
Reforming processes for syngas production: A mini-review on the current status, challenges, and prospects for biomass conversion to fuels2022/06/01English13
Advances in understanding the humins: Formation , prevention and application2022/06/01English11
Liquid ammonia spray combustion in two-stage micro gas turbine combustors at 0.25 MPa; Relevance of combustion enhancement to flame stability and NOx control2021/09/01English11
Morphology and performance evolution of anode microstructure in solid oxide fuel cell: A model-based quantitative analysis2021/03/01English9
A property database of fuel compounds with emphasis on spark-ignition engine applications2021/03/01English9
Impact of engine pressure-temperature trajectory on autoignition for varying fuel properties2020/12/01English9
NH3 combustion using three-layer stratified fuel injection for a large two-stroke marine engine: Experimental verification of the concept2022/06/01English8
A review of laminar flame speeds of hydrogen and syngas measured from propagating spherical flames2020/12/01English8
A new detailed kinetic model for surrogate fuels: C3MechV3.32022/03/01English8
Facilitating laser ignition and combustion of boron with a mixture of graphene oxide and graphite fluoride2020/12/01English7
Combustion behavior of single iron particles-part I: An experimental study in a drop-tube furnace under high heating rates and high temperatures2023/03/01English7
Towards system pressure scaling of gas assisted coaxial burner nozzles – An empirical model2021/03/01English7
Comparative study of electric-heating torrefaction and solar-driven torrefaction of biomass: Characterization of property variation and energy usage with torrefaction severity2022/03/01English7
Fabrication strategies of Ni-based catalysts in reforming of biomass tar/tar model compounds2022/03/01English7
Effects of vortex tube on exhaust emissions during cold start of diesel engines2021/06/01English6
Role of accumulation for ignition of fuel beds by firebrands2020/12/01English6
Effect of heating rate and feedstock nature on electrical conductivity of biochar and biochar-based composites2022/12/01English6
Investigating the effects of duct length and diameter and fuel-injector orifice diameter in a compression-ignition engine equipped with ducted fuel injection2021/09/01English5
Sequential pyrolysis of coal and biomass: Influence of coal-derived volatiles on property of biochar2022/03/01English5
Simulation of transient effects in a fuel injector nozzle using real-fluid thermodynamic closure2021/09/01English5
Experimental assessment of the performance of a commercial micro gas turbine fueled by ammonia-methane blends2023/03/01English5
A review of aviation oil production from organic wastes through thermochemical technologies2022/03/01English5
Investigation of nitric oxide formation in methane, methane/propane, and methane/hydrogen flames under condensing gas boiler conditions2021/03/01English4
Comparison of properties of biochar produced from different types of lignocellulosic biomass by slow pyrolysis at 600 °C2022/12/01English4
To optimized various parameters of Hopcalite catalysts in the synthetic processes for low temperature CO oxidation2021/06/01English4
Effects of fuel oxygenation and ducted fuel injection on the performance of a mixing-controlled compression-ignition optical engine with a two-orifice fuel injector2021/06/01English4
Effect of nanostructured ferrites MFe2O4 (M= Cu, Co, Mg, Zn) on the thermal decomposition of ammonium nitrate2021/06/01English4
Influence of plasma-assisted ignition on flame propagation and performance in a spark-ignition engine2021/06/01English4