Home
Research Trends
Papers list
Open Access Journals
All Journals
Search in Journals
Contact us
Scripta Materialia
Title
Publication Date
Language
Citations
Strain rate sensitivity of ductility in a Fe-28Al alloy under tensile impact
1997/10/01
English
An investigation into the fabrication and properties of Ni3Al thin coatings on nickel substrates
1998/11/01
English
Effect of microstructure and non-metallic inclusions on the impact properties of flux-cored weld metals
1997/06/15
English
Thermo-mechanical stability of directionally solidified Ai2O3-ZrO2(Y2O3) eutectic fibers
1997/05/01
English
Cavitation damage during high temperature tensile deformation in fine-grained alumina doped with magnesia or zirconia
1998/10/01
English
Anelastic grain-boundary relaxation arising from solid solution of chromium in polycrystalline Al2O3
1996/05/01
English
Effect of heat-treatments and hot-isostatic pressing on phase transformation and microstructure in a β/B2 containing γ-TiAl based alloy
2000/05/01
English
Effect of aluminide particle distribution on the high temperature crack growth characteristics of a Co-Ni-Fe superalloy
1997/10/01
English
Dynamic Restoration During the Hot Cyclic Straining of Copper
1997/12/18
English
Reply to a comment to “on the mechanism of a hydrogen peak of internal friction in high-alloyed fcc iron”
1999/04/01
English
Dislocation fiber interactions in short fiber reinforced metal matrix composites during creep and during thermal cycling
1997/12/01
English
Strain amplitude dependence of the damping capacity in Fe-17%Mn alloy
1998/01/13
English
Surface effect on the grain boundary migration in bicrystals
1998/11/01
English
Microstructural evolution during the initial stages of spray atomization and deposition
1999/08/01
English
Local values of the diffusivities at the migration front of the discontinuous precipitates in Al-22 at.% Zn alloy
1998/06/01
English
Characterisation of Ge nanocrystals in co-sputtered Ge+SiO 2 system using raman spectroscopy, RBS and TEM
2001/05/01
English
Experimental assessment of the contribution of annealing twins to CSL distributions in FCC materials
1997/05/01
English
Interfacial reactions in SiCp/Al composite fabricated by pressureless infiltration
1997/04/15
English
The effects of thermo-mechanical treatments on superplasticity of Fe-24Cr-7Ni-3Mo-0.14N duplex stainless steel
1997/03/01
English
Thermal stability of copper reinforced by nanoscaled and microscaled alumina particles investigated by internal friction
1999/04/01
English
The Deformation Texture in a Ti49Ni51 Alloy
1998/01/01
English
A D.S.C study of the transformation of retained β (βM) obtained by quenching of Ti6A14V
1996/05/01
English
THE EVOLUTION OF TEXTURE AND GRAIN SIZE DURING ANNEALING OF NANOCRYSTALLINE Ni-45% Fe ELECTRODEPOSITS
1997/12/01
English
A role of δ-ferrite in edge-crack formation during hot-rolling of austenitic stainless steels
1997/10/01
English
Bi-Sb semiconductor alloy synthesized by mechanical alloying
1997/07/01
English
Mechanically induced cyclic crystallineamorphous transformations of ball milled Co50Ti50 alloy
1997/05/01
English
Shear Banding and Texture Development in Cold-Rolled α-Brass
1998/02/01
English
Thermomechanical study of the stress assisted two way memory effect fatigue in TiNi and CuZnAl wires
1996/12/01
English
The influence of dynamic strain ageing on stress response and strain-life relationship in low cycle fatigue of 316L(N) stainless steel
1997/11/01
English
Grain refinement in a copper alloy by shaped charge explosion
1997/07/01
English
«
‹ Pervious
Next ›
»