Title	Publication Date	Language	Citations
Color Mark Formation on a Metal Surface by a Highly Concentrated Energy Source	2016/09/01	English	18
Effect of Impurities on the Phase Composition and Properties of a New Alloy of the Al–Y–Er–Zr–Sc System	2019/05/01	English	18
Studying the Nonstationary Stages of Screw Rolling of Billets with Profiled Ends	2017/07/01	English	18
Possibility of Preparing Alloys of the Al–Si System Using Amorphous Microsilica	2017/05/01	English	18
Formation and Utilization of Nanostructures Based on Carbon During Primary Aluminum Production	2016/11/01	English	18
Engineering calculations for processes involved in the production of large-diameter pipes by the sms meer technology	2012/03/01	English	17
Recycling of Electrolyzer Spent Carbon-Graphite Lining with Aluminum Fluoride Regeneration	2016/09/01	English	17
Study of heat-resistant steel strain hardening by indentation	2013/03/01	English	17
Processes in the Charge and Hearth Zones of Furnace Working Spaces and Problems in Controlling the Batch Dosing Mode during the Smelting of Industrial Silicon and High-Silicon Ferroalloys	2020/09/01	English	17
Use of electric-arc metallization to recondition the working surfaces of the narrow walls of thick-walled slab molds	2011/09/01	English	17
The transformation of defects in continuous-cast semifinished products into surface defects on rolled products	2006/01/01	English	17
Production of Hollow Railroad Axles by Screw Piercing and Radial Forging	2018/01/01	English	16
Nitric Acid Leaching of Copper-Zinc Sulfide Middlings	2016/05/01	English	16
Recent progress on commercialization of castrip� direct strip casting technology at Nucor Crawfordsville	2004/09/01	English	16
Applying Coatings to the Narrow Walls of Continuous-Caster Molds to Improve the Quality of the Surface of Slabs	2014/09/01	English	16
Nickel Sulfide Concentrate Processing Using Low-Temperature Roasting with Sodium Chloride	2014/09/01	English	16
Microarc oxidation of light alloys	2010/09/01	English	16
Copper Alloy Marking by Altering its Surface Topology Using Laser Heat Treatment	2018/09/01	English	16
Effective Laser Technology for Making Metal Products and Tools	2016/07/01	English	16
Dynamic recrystallization behavior and hot deformation characteristics in 4340 steel	2012/07/01	English	16
The blast-furnace process – is there any alternative?	2012/07/01	English	15
Production and usage of powdered alkali metal silicate hydrates	2008/11/01	English	15
Reengineering of the Slab-Centering Unit of a Roughing Mill Stand	2018/11/01	English	15
Efficient Management of the Charging of Blast Furnaces and the Application of Contemporary Means of Control Over the Variable Technological Conditions	2018/03/01	English	15
Prediction of the Fracture of Metal in the Process of Screw Rolling in a Two-Roll Mill	2018/03/01	English	15
Nature of Angular Carbides in Damascus Steel	2017/05/01	English	15
Improvement of the structure and properties of ingots and worked aluminum alloy semifinished products by melt ultrasonic treatment in a cavitation regime	2010/11/01	English	15
Comparison of Weldability of High-Strength Pipe Steels Microalloyed with Niobium, Niobium and Vanadium	2014/01/01	English	15
Reduction of the Dynamic Loads in the Universal Stands of a Rolling Mill	2015/07/01	English	15
Leaching of Refractory Gold Ores by Microwave Irradiation: Comparison with Conventional Leaching	2013/11/01	English	15