Journal of the Society of Materials Science, Japan

Title Publication Date Language Citations
Strength and Formability of Friction Stir Welded Aluminum Alloy with Cold Rolled Steel2009/01/0111
Effect of Volume Expansion on Transformation Plasticity during Ferrite and Martensite Transformation of Steel2011/01/0111
Improvement of Fatigue Limit by Shot Peening for High Strength Steel Specimens Containing a Crack-like Surface Defect2009/01/01English11
Effect of Addition to the Gypsum on Phosphorous Removal Properties of Wollastonite-Type Adsorbent2007/01/0111
Consolidation with Grain Refinement by Compression Shearing Method under Room Temperature2005/01/0111
Effect of Pre-Strain History on Small Crack Growth under Low Cycle Fatigue for JIS SFVQ1A Steel2011/01/0111
Evaluation of Multiaxial Low-Cycle Fatigue Failure Based on New Criterion and its Application to High Temperature Structural Design.1993/01/0111
Analysis of temperature, stress and metallic structure in carburized-quenched gear considering transformation plasticity.1986/01/0111
Fatigue Crack Initiation and Propagation Behavior and Fracture Surface of Eutectoid Steels.1994/01/0111
A Study of Deformation Mechanism of High Density Polyethylene and Polypropylene by Simultaneous Measurement of Stress, Strain and Infrared Dichroism1967/01/0111
Effect of densification treatment on the mechanical properties of borate glasses.1991/01/0111
Corrosion Resistance Evaluation of Brittle Materials in Boiling Sulfuric Acid.1999/01/0111
Creation of Fine Grained-Layer and High Hardness-Layer Using IH-FPP Treatment System and Its Effect on the Fatigue Properties of Steel2011/01/0111
Effects of Temperature on the Fiber Matrix Interfacial Properties of Carbon Fiber Reinforced Highly Heat Resistant Polyamide Resin2017/01/01English11
Effective Diffusion in Flake-Polymer Composites with Accelerated Interphase Transport2012/01/01English11
Ceramic Materials. Effects of Porosity and Pore Morphology on Mechanical Properties of Porous Alumina.2001/01/0111
Evaluation of Fracture Strength and Interfacial Strength of Sputtered TiN and AlN Films on Titanium Substrate.2001/01/0111
Discussions on Method of Impact Tension Test for Strip Specimen2004/01/0111
Elastic Constants and Vickers Hardness of Lead Borate Glasses1974/01/0111
The Effect of High Vacuum Environment on Tensile Fatigue Properties of Ti-6Al-4V Alloy.2000/01/0111
The Mechanical Properties of Bamboo Fibers Prepared by Steam-Explosion Method2003/01/0111
Fatigue Life Prediction for Bearing Steel Failed with Fish-Eye at Subsurface in Rotating Bending.2001/01/0111
1984/01/0111
Effects of Outdoor Exposure on the Strength Distribution of Oriented Strand Board(OSB) and Particle Board.2000/01/0111
Diffraction Plane Dependence of Elastic Constants in Ferritic Steel in Neutron Diffraction Stress Measurement.1995/01/0111
Effects of Prestraining on Low Cycle Fatigue Properties of Low Alloy TRIP Steels.2001/01/0111
Estimation of Dynamic Interlaminar Fracture Toughness of CFRP by ENF Test Using SHPB Method. II. Strain Rate Dependence of Mode II Interlaminar Fracture Toughness of Unidirectional CF/Epoxy Composite Laminates.1994/01/0111
Development of Phosphorous Adsorbent Using Mechano-Chemically Treated Calcium Silicate2004/01/0111
1980/01/0111
Factors Influencing the Formation of ODA in Ultralong Fatigue Regime2003/01/0111