Title	Publication Date	Language	Citations
Plane problem for an anisotropic body containing an inclusion surrounded with an elastic layer	2000/05/01	English
Compression of a ring bounded by rigid surfaces	2000/05/01	English
Development Of New Low-Alloy Steels For Rock Roller Drill Bits	2000/05/01	English
Thermoelastic contact of a retaining ring with a cylinder under the conditions of frictional heat generation	2000/05/01	English
Polyurethane materials as anticorrosive coatings of pipelines	2000/05/01	English
Microhardness of extruded polyethylene and composites based on it	2000/05/01	English
Influence of incomplete annealing of titanium (a + β)-alloy and its welded joints on fatigue resistance and corrosion-fatigue resistance	2000/03/01	English
Quasistatic thermoelastoplastic problem for a circular eccentric tube	2000/03/01	English
Temperature and wear of the friction surfaces of a cermet patch and metal disk in the process of braking	2000/03/01	English
Antifriction properties of heat-resistant alloys in hydrogen	2000/03/01	English
Inverse problem of optical monitoring of residual stresses in piecewise-homogeneous cylindrical shells	2000/03/01	English
Modeling of the near-tip zones of a crack between two anisotropic materials	2000/03/01	English
Local fracture of a composition containing an inclusion with hardening in the prefracture bands	2000/03/01	English
Formation of functional layers on titanium alloys under nonstattonary conditions	2000/03/01	English
Residual durability of solids contacting under conditions of fretting fatigue	2000/03/01	English
Equations in stresses for the three-, two-, and one- dimensional dynamic problems of thermoelasticity	2000/03/01	English
Reversible phenomena in amorphous metal alloys	2000/03/01	English
Limiting equilibrium of a welded joint of gas main	2000/03/01	English
Electrochemical corrosion behavior of 12khl8ag18sh steel in chloride- containing media with copper (H) ions	2000/03/01	English
Estimation of the efficiency of inhibitor protection of steels against cavitation- erosive fracture	2000/03/01	English
Dynamic measurements of temperature in the process of pulse laser treatment of materials	2000/03/01	English
Some theoretical aspects of estimation of damage to products by using acoustic emission signals	2000/03/01	English
Generalized griffith problem of shear with regard for the roughness of the crack surfaces	2000/03/01	English
A General method for the construction of difference analogs of a biharmonic operator on irregular nets	2000/03/01	English
Fracture mechanics of materials and strength of structures	2000/03/01	English
Prediction of the contact durability of back-up rolls of forge-rolling mills in the process of development of pitting	2006/11/01	English
Morphology of the subsurface layers of a Ti-Al-Mo-V alloy after carbonitriding	2006/11/01	English
Effect of polyester and isocyanate components on the hardening of silicon-organic compositions	2006/11/01	English
Modeling of a cracklike hollow filled with medium by an elongated ellipse	2006/11/01	English
Influence of lead on the wear resistance of cast composites of the Fe-Cr-Cu-Ti-C system in sliding friction	2006/11/01	English