Journal of the Japan Institute of Metals and Materials

Title Publication Date Language Citations
Creep Properties of Al Matrix Composites Reinforced with Alumina Short Fibers1999/01/01English
Evaluation of Residual Stress and Optical Transmittance for Amorphous B-N-C Films Prepared by Low Pressure Chemical Vapor Deposition1991/01/01English
Fatigue Fracture of Ti-5Al-2.5Sn Alloy under Combined Alternating Bending and Torsional Stresses1976/01/01English
On a New Method of Determining the Activities in the Molten Alloys- The Touch Instant Electromotive Force Method1967/01/01English
Deformation of Easy Glide in High-concentrated Cu-Si Alloy Single Crystals1976/01/01English
Fracture Process during Fracture Toughness Testing in Al<SUB>2</SUB>O<SUB>3</SUB> Ceramics by AE Source Characterization1985/01/01English
Contactless Measurement of Ultrasonic Attenuation and Average Grain Size with Electromagnetic Acoustic Resonance1994/01/01English
Anomalous Hardening of Cu-Zn Alloy (2 nd Report). Secular Change After Cold Work and Anomalous Hardening1954/01/01English
On the Tensile Properties of Recrystallized Molybdenum Wire Alloyed with Ru and C1973/01/01English
Structure of a Unidirectionally Solidified InSb-Sb Eutectic Alloy1986/01/01English
Industrial Research on the Heat Treatment of MT Permanent Magnet1960/01/01English
The Compositional Change of the Ferrite and Austenite Phases in Two-Phase Stainless Steels1978/01/01English
1953/01/01English
Influence of Cr, Mn, Zr on the Pre-Precipitation in Al-Zn Alloys1965/01/01English
CO Reduction Behavior of (Ni<SUB>1&minus;<I>x</I></SUB>Mg<I><SUB>x</SUB></I>)O Pellet and Microstructure of Reduced Nickel1997/01/01English
Internal Friction and Elastic Modulus of Sintered Copper1965/01/01English
Corrosion of Cr-Noble Metal Alloys in H<SUB>2</SUB>SO<SUB>4</SUB> Solutions1993/01/01English
A Study On the Interface Tension of Molten Metals in Molten Fluxes (3rd Report). The Interface Tension of Sn-Pb Molten Alloys in ZnCl<SUB>2</SUB> Flux1958/01/01English
Direct ICP Emission Spectrochemical Analysis of High Speed Steels using Aerosol Cyclone with Low Voltage Spark Discharge1985/01/01English
Effects of Cu Addition on &beta;-Phase Formation Rate in Fe<SUB>2</SUB>Si<SUB>5</SUB>-B Alloys and Their Thermoelectric Power1997/01/01English
Liquidus-Surface Phase Diagram and Morphology of Compounds in Fe-5%Cr-C-B Alloys1991/01/01English
Quantitative Analysis of Small Amounts of Oxygen in Titanium by Secondary Ion Mass Spectrometry1993/01/01English
On the Fluidized Condition of Open Hearth Dust1964/01/01English
Residual Resistance of Zone Refined Copper1964/01/01English
ERRATUM1987/01/01English
Effect of Surface Characteristics on the Rate of Carburization of Iron in CO-N<SUB>2</SUB> Atmosphere1987/01/01English
Effects of NaClO<SUB>3</SUB> and NaCl on the Corrosion Behavior of Iron-Chromium-Nickel Alloys in Concentrated Caustic Soda Solutions1981/01/01English
Corrosion Inhibition of Zinc by Benzylammonium-N-benzylcarbamate1983/01/01English
Studies on Heat-Treatment of High Alloy Tool Steels (1st Report). On Retained Austenite in Hardened High-Carbon High-Chromium Steel1956/01/01English
Evaluation of Superplastic Characteristics by means of Tensile Test of R-type Specimen1993/01/01English