3D Printing and Additive Manufacturing

Title Publication Date Language Citations
Influence of Powder Loading Fraction on Properties of Bonded Permanent Magnets Prepared By Selective Laser Sintering2021/06/01English
A Feature-Specific Local Cooling System to Control Tensile Strength and Dimensional Accuracy in Fused Filament Fabrication2023/02/01English
The Facile Three-Dimensional Printing of the Composite of Copper Nanosized Powder and Micron Powder with Enhanced Properties2023/08/01English
Optimization of Selective Laser Sintering Process Parameters Based on PA12 Powders for Bone Tissue Scaffolds2023/10/01English
Optimization of the Impact Attenuation Capability of Three-Dimensional Printed Hip Protector Produced by Fused Deposition Modeling Using Response Surface Methodology2023/10/01English
Electro-Osmotic Gripper Characterization for Layered Assembly2022/08/01English
Method of Multiaxis Three-Dimensional Printing with Intralayer Height Variation for Stairstep Effect Compensation2023/12/01English
Cross Algorithm of Additive Manufacturing Micromixers2023/06/01English
Additive Hybrids2016/03/01English
Beyond the Quest from Personal to Production2017/12/01English
Correction to: In Vitro Evaluation of Pore Size Graded Bone Scaffolds with Different Material Composition, by Daskalakis, et al. (DOI: 10.1089/3dp.2022.0138)2023/06/01English
3D Printing Process Research and Performance Tests on Sodium Alginate-Xanthan Gum-Hydroxyapatite Hybridcartilage Regenerative Scaffolds2023/05/02English
Assessing the Dispersion Stability of Antimicrobial Fillers in Photosensitive Resin for Vat Polymerization 3D Printing2023/05/15English
In Situ Wire + Powder Synchronous Arc Additive Manufacturing of Ti–Cu Alloys2024/02/01English
Tensile, Fatigue Properties and Their Anisotropies of Al-Mg Alloy Fabricated by Wire-Arc Additive Manufacturing2023/05/15English
Effect of Sandblasting Process on 3D Printed Intervertebral Cage2024/03/11English
Microfluidic Fuel Cells Printed with Controlled Rasterization, Interdigitation, and Multilevel Honeycomb Structures for Better Performance2024/03/08English
Design and Implementation of a Novel Fiber Deposition System to Enable Laser Sintering of Chopped Fiber Reinforced Polymers2024/04/05English
Topology Optimization Design and Mechanical Properties of 3D-Printed Solid-Lattice Hybrid Structures with Variable-Density or Iso-Density2024/04/03English
Functionalization of Cyclic Olefin Copolymer for Enhanced Electrical Conductivity in Material Extrusion 3D-Printing: Potential Applications in Laboratory Environments and Small-Scale Experiments2024/04/03English
Influence of Substrate Material and Sensor Geometry Variations on the Performance of Fused Deposition Modeling-Printed Strain Sensors2024/04/11English
Expert System for Online Defect Detection in Medical Devices Produced by Electron Beam Melting Using Layer-by-Layer Optical Images2024/04/05English
Printing of Cantilevers and Millifluidic Devices Using Ultrasound Waves2024/04/11English
Surface Structure Modification in Fused Filament Fabrication (FFF) Multi-Material Printing for Medical Applications: Printing of a Hand Prosthesis2023/12/12English
Effects of Acetyl Tributyl Citrate on the Mechanical Properties, Abrasion Resistance, and Cytotoxicity of the Light-Cured 3D Printing Polyurethane Resins2023/12/14English
Laser Powder Bed Fusion of Stainless Steel 316L for Rectangular Micropillar Array with High Geometrical Accuracy and Hardness2024/01/02English
Additive Manufacturing of Porous Silicon Nitride Inspired by Triply Periodic Minimal Surface2024/01/03English
Detecting Selective Laser Melting Beam Power from Ultrasonic Temporal and Spectral Responses of Phononic Crystal Artifacts Toward In-Situ Real-Time Quality Monitoring2023/12/12English
The Effect of Thermal Cycle on Hot Cracking Evolution and Formation Mechanism in Thin Wall, Single Layer, and Cubic Samples of High-Strength Al-Cu-Mg-Mn Alloys Fabricated by Laser Powder Bed Fusion2023/12/13English
Additive Manufacturability and Parametric Studies on an Extended Three-Dimensional Re-Entrant Auxetic Structure with Angled Struts2023/10/10English