Heat Recovery Systems and CHP

Title Publication Date Language Citations
Effect of adsorbent heat and mass transfer resistances on performace of an open-cycle adiabatic desiccant cooling system1988/01/01English16
Analytical model for the thermal wave adsorption heat pump cycle1992/01/01English15
Thermodynamic design data for absorption heat transformers—III. Operating on ammonia-water1987/01/01English15
Heat pipe research and development in western Europe1989/01/01English15
Exergy analysis of a compression refrigeration system1989/01/01English15
Analysis of combustion chamber insulation effects on the performance and exhaust emissions of a DI diesel engine using a multi-zone model1995/10/01English15
Effect of combustion chamber insulation on the performance of a low heat rejection diesel engine with exhaust heat recovery1989/01/01English14
Natural convection heat transfer coefficients for a horizontal cylinder with vertically attached circular fins1992/11/01English14
Combined cycle heat recovery steam generators optimum capabilities and selection criteria1995/02/01English14
Effect of control modes and turbine cooling on the part load performance in the gas turbine cogeneration system1995/04/01English14
A computational, modular approach to the simulation of powerplants1995/02/01English13
The upgrading of waste heat by means of water-sulphuric acid absorption heat transformers1987/01/01English13
Economics of mini-combined heat and power packages for use in hotels1990/01/01English13
Rotary heat pump driven by natural gas1995/08/01English12
Effect of reduction in seal clearances on leakages in a rotary heat exchanger1989/01/01English12
Experimental results concerning seal clearances in some rotary heat exchangers1988/01/01English12
Investigation of the performance of a heat pump under frosting and defrosting conditions1989/01/01English12
Investigations of thermohydrodynamic instabilities and ground storage in a solar pond by simulation model1994/07/01English12
Performance of shell-and-dimpled-tube heat exchangers for waste heat recovery1988/01/01English12
Thermodynamic design data for absorption heat transformers—Part III. Operating on water-lithium chloride1988/01/01English12
Performance of an open-cycle desiccant cooling system using advanced desiccant matrices1989/01/01English12
Fan performance in air-cooled steam condensers1994/07/01English12
Energy recovery and plume reduction from an industrial spray drying unit using an absorption heat transformer1994/05/01English12
Feasibility and design studies for heat recovery from a refrigeration system with a canopus heat exchanger1995/10/01English12
Heat pumps in industry—I. Equipment1994/11/01English11
Thermodynamic criteria for optimal absorption heat pump media1988/01/01English11
New working pairs for medium and high temperature industrial absorption heat pumps1988/01/01English11
Heat pipe research and development in the U.S.S.R.1989/01/01English11
Heat pumps and pinch technology1990/01/01English11
Heat pipe heat storage performance1989/01/01English11