Materials Characterization

Title Publication Date Language Citations
Electronic structure of refractory carbides and nitrides1995/01/01English
Distribution of Al12Fe3Si and (FeAl6)Si in a HIPed Al-10.71 wt.% Si casting1996/10/01English
Metallography of alkali metal single crystals2001/01/01English
Delta ferrite predictions for cast duplex steels with high nitrogen content2001/08/01English
Surface science techniques1995/12/01English
Interference of Three Electron Waves and Its Application to Direct Visualization of Electric Fields1999/04/01English
Mechanical and structural properties of AISI 8620 steel TiN coated, nitrided and TiN coated+nitrided2001/04/01English
Modeling Microstructural Heterogeneity in Materials by Using Q-Mode Factor Analysis1998/01/01English
Understanding Pressure Vessel Steels2000/01/01English
High-Resolution and Low-Voltage FE-SEM Imaging and Microanalysis in Materials Characterization2000/04/01English
The Theory of Diffusional Phase Transformations and Microstructure 1 1Editor's Note. This article is an important paper taken from the 1971 Symposium Program of the International Metallographic Society. Furthermore, this paper is judged as an outstanding contribution to the field of metallography and, for this reason, it is presented at this time in its original and unabridged form.1997/08/01English
Maraging Behavior in an Fe-19.5Ni-5Mn Alloy I: Precipitation Characteristics1997/08/01English
Characterization and morphological analysis of pearlite in a eutectoid steel2000/08/01English
Martensitic transformation of quaternary Ti50.5−XNi49.5ZrX/2HfX/2 (X=0–20 at.%) shape memory alloys2000/08/01English
Metallography of ancient bronzes: Study of pre-roman metal technology in the Iberian Peninsula1996/04/01English
Utilizing local orientation image analysis for microstructure quantification in additive manufacturing2024/04/01English
Facet identification in textured polycrystalline coatings by EBSD-aided SEM trace analysis2024/03/01English
Book review1998/04/01English
Full length article1998/08/01English
TEM Investigation of the As-Quenched Compound Layer Formed by Austenitic Nitrocarburizing1998/07/01English
Anomalous behaviour of growth of crystalline and amorphous GaxSe1−x2000/09/01English
Microstructural evolution during powder metallurgical processing of a Ni3Si-based intermetallic alloy1997/01/01English
Preparation, Transmission Electron Microscopy, and Microanalytical Investigations of Metal-III-V Semiconductor Interfaces1997/08/01English
Transmission Electron Microscope Characterization of a Plasma-Sprayed ZrO2-Y2O3-TiO2 Thermal Barrier Coating1998/08/01English
Shear Transformations and Microstructure 1 1Editor's Note. This article is an important paper taken from the 1971 Symposium Program of the International Metallographic Society. Furthermore, this paper is judged as an outstanding contribution to the field of metallography and, for this reason, it is presented at this time in the original and unabridged form.1997/08/01English
Precracking Structures in a Creep-Ruptured Low-Carbon Cr-Mo Steel1997/08/01English
Preparation of soft solder joints1996/04/01English
Microscopic investigation on the origin of wear by surface fatigue in dry sliding2000/07/01English
Index1997/08/01English
Book review1999/01/01English