Mechanics of Composite Materials

Title Publication Date Language Citations
Strength of the Joint of an Anisotropic Composite and a Cylindrical Element of the Exhaust System of Road Vehicles2016/03/01English29
Design of novel morphing structures based on bistable composites with piezoceramic actuators2006/07/01English28
Relationships Between the Ultimate Strengths of Polymer Composites in Static Bending, Compression, and Tension2019/05/01English27
Theoretical and experimental investigation of anisotropic damage in textile-reinforced composite structures2004/11/01English27
Properties of unidirectional GFRPs based on an epoxy resin modified with polysulphone or an epoxyurethane oligomer2006/11/01English26
Environmental degradation of carbon nanotube-modified composite laminates: a study of electrical resistivity2009/01/01English26
Investigation of Two- and Three-Body Wear Resistance on Flowable Bulk-Fill and Resin-Based Composites2018/07/01English26
Development of a finite-element analysis methodology for the propagation of delaminations in composite structures2007/01/01English26
Stresses Arising During Cure of the Composite Wound on the Cylindrical Surface of an Element of Exhaust System2015/07/01English26
Determination of the thermoelastic characteristics of spatially reinforced fibrous media in the case of general anisotropy of their components2010/11/17English26
Analitical Description of the Creep of Expanded Polystyrene under Compressive Loading2005/07/01English26
Theoretical-Experimental Method for Determining the Parameters of Damping Based on the Study of Damped Flexural Vibrations of Test Specimens 2. Aerodynamic Component of Damping2014/07/01English25
Numerical and Experimental Analyses of the Hoop Tensile Strength of Filament-Wound Composite Tubes2020/09/01English25
Theoretical-Experimental Method for Determining the Parameters of Damping Based on the Study of Damped Flexural Vibrations of Test Specimens. 1. Experımental Basıs2014/05/01English25
An Analysis of Interfacial Stresses in Steel Beams Bonded With a Thin Composite Plate Under Thermomechanical Loading2013/12/27English25
A system of steel-elastomer sandwich plates for strengthening orthotropic bridge decks2007/03/01English24
Smart Composite Structures with Embedded Sensors for Load and Damage Monitoring – A Review2021/05/01English24
Assessing the Effects of Porosity on the Bending, Buckling, and Vibrations of Functionally Graded Beams Resting on an Elastic Foundation by Using a New Refined Quasi-3D Theory2019/05/01English24
Modeling the Tensile Behavior of Cross-Ply C/SiC Ceramic-Matrix Composites2015/07/01English24
Abrasion Resistance and Mechanical Properties of Waste-Glass-Fiber-Reinforced Roller-compacted Concrete2018/05/01English24
A biodegradable polymer nanocomposite: Mechanical and barrier properties2008/01/01English24
The Mathematical Study of an Edge Crack in Two Different Specified Models under Time-Harmonic Wave Disturbance2022/03/01English23
Mode II Delamination of a Unidirectional Carbon Fiber/Epoxy Composite in Four-Point Bend End-Notched Flexure Tests2005/09/01English23
Buckling Analysis of Chiral Single-Walled Carbon Nanotubes by Using the Nonlocal Timoshenko Beam Theory2014/02/27English23
A modal analysis of carbon-nanotube-reinforced polymer by using a multiscale finite-element method2013/07/01English23
Structural Modeling of the Mechanical Behavior of Periodic Cellular Solids: Open-Cell Structures2005/05/01English22
Comparison of Glass-Transition Temperatures for Epoxy Polymers Obtained by Methods of Thermal Analysis2020/05/01English22
Mechanical behavior of concrete columns confined by basalt FRP windings2012/10/26English22
Moment redistribution in continuous reinforced concrete beams strengthened with carbon-fiber-reinforced polymer laminates2007/09/01English22
Crashworthiness Experiment and Simulation Analysis of Composite Thin-Walled Circular Tubes Under Axial Crushing2019/03/01English22