Title	Publication Date	Language	Citations
Should undergraduates be instructed in loss prevention?	1988/04/01	English	7
Vapor‐Liquid disengagement in atmospheric liquid storage vessels subjected to external heat source	1985/10/01	English	7
Chemical plant risk assessment using HAZOP and fault tree methods	1984/07/01	English	7
Management of quantitative risk assessment in the chemical process industry	1990/10/01	English	7
Gas explosion processes in enclosures	1984/10/01	English	7
Using material data in static hazard assessment	1992/04/01	English	7
Experience with a simulator for training ammonia plant operators	1990/01/01	English	7
Using thermodynamic availability to determine the energy of explosion for compressed gases	1992/04/01	English	7
Case history of a deflagration involving an organic solvent/oxygen system below its flash point	1991/01/01	English	7
Effectiveness of explosion venting as a protective measure for silos	1985/01/01	English	7
Ignition capabilities of hot surfaces and mechanically generated sparks in flammable gas and dust/air mixtures	1988/04/01	English	7
Equations for the VDI and Bartknecht nomograms	1986/01/01	English	7
A study of flame arrestors in piping systems. Even officially approved flame arrestors must be used only under the exact conditions for which they were tested and approved	1983/01/01	English	6
Health, safety and loss control topics in the senior design courses	1987/04/01	English	6
Explosion in vessels: Recent results. New data on explosions in closed and vented vessels provide valuable tools for loss‐prevention engineers	1983/04/01	English	6
Thermal stability evaluation using differential scanning calorimetry and accelerating rate calorimetry	1982/01/01	English	6
On the need to publish more case histories	1988/07/01	English	6
A simple technique for the optimization of lay‐out and location for chemical plant safety	1987/01/01	English	6
Use of ammonia in energy‐related applications	1982/07/01	English	6
Mitigation of hazardous emergency release source terms via quench tanks	1992/04/01	English	6
Approximate hazard ratings and venting requirements from CSI‐ARC data. An up‐to‐date review of methods for analyzing single‐ and multiple‐reaction data from adiabatic‐reaction calorimeters	1983/01/01	English	6
Design charts for two‐phase flashing flow in emergency pressure relief systems	1989/01/01	English	6
Process safety management within Dupont	1990/10/01	English	6
Emergency relief systems—sizing and scale‐up. A practical and safe, but not overly conservative, sizing method is detailed	1983/01/01	English	6
Correlation of acid gas‐ethanolamine equilibrium using ionic concentrations	1987/04/01	English	6
Mitigation of vapor cloud hazards	1985/04/01	English	6
Safety analysis for an allyl chloride plant	1982/01/01	English	6
The prevention of major leaks—better inspection after construction?	1984/01/01	English	6
Flashback from waste gas incinerator into air supply piping	1992/04/01	English	6
Design and sizing of knock‐out drums/catchtanks for reactor emergency relief systems	1986/07/01	English	5