Title	Publication Date	Language	Citations
EFFECT OF INJECTION PRESSURE ON SPRAY CHARACTERISTICS AND FUEL DISTRIBUTION IN DIESEL ENGINE CONDITIONS BY PLANAR LASER-INDUCED EXCIPLEX FLUORESCENCE (PLIEF) TECHNOLOGY	2008/01/01	English
EFFECT OF PERIODIC DISTURBANCES ON NON-NEWTONIAN FLUID SPRAYS	2008/01/01	English
NUMERICAL INVESTIGATION ON THE DISINTEGRATION OF ROUND TURBULENT LIQUID JETS USING LES/VOF TECHNIQUES	2008/01/01	English
INVESTIGATION OF A COAXIAL AIR-BLAST ATOMIZER USING PARTICLE IMAGE VELOCIMETRY AND COMPUTATIONAL FLUID DYNAMICS	2008/01/01	English
SIZE AND VELOCITY MEASUREMENTS IN SPRAYS AND PARTICLE-PRODUCING FLAME SPRAYS	2008/01/01	English
Index to Volume 18	2008/01/01	English
BREAKUP OF LIQUID JETS EMANATING FROM ELLIPTICAL ORIFICES AT LOW FLOW CONDITIONS	2008/01/01	English
EFFECT OF THE INNER TWO-PHASE FLOW ON THE PERFORMANCE OF AN INDUSTRIAL TWIN-FLUID NOZZLE WITH AN INTERNAL MIXING CHAMBER	2009/01/01	English
STABILITY OF RICH PREMIXED SPRAY FLAMES	2009/01/01	English
EXPERIMENTAL AND NUMERICAL ANALYSIS OF SPRAY DISPERSION AND EVAPORATION IN A COMBUSTION CHAMBER	2009/01/01	English
SIMULATION OF FUEL-EXHAUST MIXING IN EXHAUST AFTERTREATMENT SYSTEMS USING SIMPLIFIED SPRAY MODELS FOR PULSE-WIDTH MODULATED FUEL INJECTORS	2009/01/01	English
SECONDARY DROPLET FORMATION DURING BINARY SUSPENSION DROPLET COLLISIONS	2009/01/01	English
EXPERIMENTAL COMPARISONS BETWEEN DROPLET-DROPLET COLLISION AND SINGLE-DROPLET IMPACTS ON A SOLID SURFACE	2009/01/01	English
KINETIC ALGORITHM FOR MODELING THE DROPLET EVAPORATION PROCESS IN THE PRESENCE OF HEAT FLUX AND BACKGROUND GAS	2009/01/01	English
DEMONSTRATION OF DIGITAL HOLOGRAPHIC DIAGNOSTICS FOR THE BREAKUP OF LIQUID JETS USING A COMMERCIAL-GRADE CCD SENSOR	2009/01/01	English
EXPERIMENTAL STUDY ON SPRAY AND MIXTURE PROPERTIES OF THE GROUP-HOLE NOZZLE FOR DIRECT-INJECTION DIESEL ENGINES, PART I: A COMPARATIVE ANALYSIS WITH THE SINGLE-HOLE NOZZLE	2009/01/01	English
EXPERIMENTAL STUDY ON SPRAY AND MIXTURE PROPERTIES OF THE GROUP-HOLE NOZZLE FOR DIRECT-INJECTION DIESEL ENGINES, PART II: EFFECTS OF INCLUDED ANGLE AND INTERVAL BETWEEN ORIFICES	2009/01/01	English
EXPERIMENTAL DATA AND NUMERICAL SIMULATION OF COMMON-RAIL ETHANOL SPRAYS AT DIESEL ENGINE-LIKE CONDITIONS	2009/01/01	English
NEWTONIAN AND NON-NEWTONIAN SPRAY INTERACTION WITH A HIGH-SPEED MOVING SURFACE	2009/01/01	English
EFFECT OF SKEWNESS ON THE CHARACTERISTICS OF IMPINGING JET ATOMIZERS	2009/01/01	English
INFLUENCE OF VORTEX FLOW AND CAVITATION ON NEAR-NOZZLE DIESEL SPRAY DISPERSION ANGLE	2009/01/01	English
SPRAY CHARACTERISTICS OF ARTIFICIAL AEROSOL CLOUDS IN A LOW-SPEED ICING WIND TUNNEL	2009/01/01	English
SPRAY VELOCITY AND DROP SIZE MEASUREMENTS IN FLASHING CONDITIONS	2009/01/01	English
AN APPRAISAL OF SWIRL ATOMIZER INVISCID FLOW ANALYSIS, PART 2: INVISCID SPRAY CONE ANGLE ANALYSIS AND COMPARISON OF INVISCID METHODS WITH EXPERIMENTAL RESULTS FOR DISCHARGE COEFFICIENT, AIR CORE RADIUS, AND SPRAY CONE ANGLE	2009/01/01	English
COMMENTS ON "AN APPRAISAL OF SWIRL ATOMIZER INVISCID FLOW ANALYSIS, PART 1: THE PRINCIPLE OF MAXIMUM FLOW FOR A SWIRL ATOMIZER AND ITS USE IN THE EXPOSITION AND COMPARISON OF EARLY FLOW ANALYSES," BY J. J. CHINN	2009/01/01	English
AN APPRAISAL OF SWIRL ATOMIZER INVISCID FLOW ANALYSIS, PART 1: THE PRINCIPLE OF MAXIMUM FLOW FOR A SWIRL ATOMIZER AND ITS USE IN THE EXPOSITION AND COMPARISON OF EARLY FLOW ANALYSES	2009/01/01	English
MOLECULAR DYNAMICS SIMULATIONS OF NANODROPLET WETTING ON A SOLID SURFACE	2009/01/01	English
ESTIMATION OF THE BREAKUP LENGTH FOR A PRESSURE-SWIRL SPRAY FROM THE EXPERIMENTALLY MEASURED SPRAY ANGLE	2009/01/01	English
ATOMIZATION AND DISPERSION MEASUREMENTS IN FIRE SPRINKLER SPRAYS	2009/01/01	English
SPRAY COOLING OF A NONMETALLIC HIGH-TEMPERATURE WALL	2009/01/01	English