Journal of Fuel Cell Science and Technology

Title Publication Date Language Citations
Ex Situ Characterization Method for Flooding in Gas Diffusion Layers and Membrane Electrode Assemblies With a Hydrophilic Gas Diffusion Layer2015/11/17English1
Simplified Model to Predict Incipient Flooding/Dehydration in Proton Exchange Membrane Fuel Cells2006/05/19English1
Thermofluid-Dynamic Analysis of Circular-Planar Type Intermediate-Temperature Solid Oxide Fuel Cells2008/11/06English1
A Methodology for Assessing Fuel Cell Performance Under a Wide Range of Operational Conditions: Results for Single Cells2006/03/03English1
Preparation and Characterization of Pt/Superfine Mesocarbon Microbead Powers Electrocatalysts2005/11/17English1
Dynamic Load and Temperature Behavior of a PEFC-Hybrid-System2006/04/05English1
Dynamic Modeling on the Hybrid Molten Carbonate Fuel Cell-Gas Turbine Bottoming Cycle2004/11/24English1
Efficient Parallel Simulation of Direct Methanol Fuel Cell Models2004/08/13English1
Trivariant Lagrange Factor Polynomial for Discrete Rayleigh Distributed Reliability Analysis of Aeroengine Combustion Chamber Cylinder2013/01/10English1
An Analytical Solution to Predict the Inception of Two-Phase Flow in a Proton Exchange Membrane Fuel Cell2010/08/20English1
Electrical Properties of Sr0.86Y0.08TiO3 Under Redox and Full Cell Fabrication Conditions2012/08/22English1
Pumpless Fuel Supply Using Pressurized Fuel Regulated by Autonomous Flow-Rate Regulation Valves2012/04/25English1
Manufacturing of High-Temperature Polymer Electrolyte Membranes—Part II: Implementation and System Model Validation2009/10/07English1
Optimizing the Anode Structure of a Passive Tubular-Shaped Direct Methanol Fuel Cell to Operate With High Concentration Methanol2012/08/28English1
Design, Fabrication, and Performance Analysis of a Passive Micro-PEM-Fuel-Cell Stack2009/05/11English1
Use of Optimal Controls to Mitigate Competing Performance Objectives in a Polymer Electrolyte Membrane Fuel Cell System2009/05/12English1
Experimental Study on Performance of a Banded Structure Membrane Fuel Cell2009/05/11English1
Polarization Resistances of (Ln1−xSrx)CoO3 (Ln=Pr, Nd, Sm, and Gd x=0, 0.3, 0.5, 0.7, and 1) as Cathode Materials for Intermediate Temperature-operating Solid Oxide Fuel Cells2009/05/12English1
Probabilistic-Based Design Methodology for Solid Oxide Fuel Cell Stacks2009/02/23English1
A Virtual Prototype of Proton Exchange Membrane Fuel Cell Using VHDL-AMS Language2009/02/25English1
Adjoint-Based Sensitivity Analysis and Error Correction Methods Applied to Solid Oxide Fuel Cells2009/02/25English1
Design of a Membraneless Passive Planar Four-Cell Direct Borohydride Fuel Cell2011/12/19English1
Preparation of Electrocatalysts for Polymer Electrolyte Fuel Cell Cathodes From Au-Pt Core-Shell Nanoparticles Synthesized by Simultaneous Aqueous-Phase Reduction2013/06/17English1
Nonenzymatic Alkaline Direct Glucose Fuel Cell With a Silicon Microchannel Plate Supported Electrocatalytic Electrode2013/06/17English1
Studies on the Reduction Mechanism of Oxygen on Ag/C Catalysts in Alkaline Solutions2013/09/13English1
Three-Dimensional Simulation-Based Optimum Design of Direct Methanol Fuel Cell System2013/03/26English1
Independent Analysis of Real-Time, Measured Performance Data From Microcogenerative Fuel Cell Systems Installed in Buildings2015/06/01English1
Publisher's Note: “A Nonisothermal PEM Fuel Cell Model Including Two Water Transport Mechanisms in the Membrane” [Journal of Fuel Cell Science and Technology, 2008, 5(1), p. 011007]2008/04/21English
Test Results and Efficiency Estimation of 1.2MPa Pressurized MCFC Module2008/04/18English
Publisher's Note: “Yttrium-Doped Barium Zirconates as Ceramic Conductors in the Intermediate Temperature Range” [Journal of Fuel Cell Science and Technology, 2008, 5(1), p. 011003]2008/04/21English