Materials Performance and Characterization

Title Publication Date Language Citations
Measurement and Recording of Quenching Intensity in Workshop Conditions Based on Temperature Gradients2016/07/29English6
Real and Effective Heat Transfer Coefficients (HTCs) Used for Computer Simulation of Transient Nucleate Boiling Processes during Quenching2012/07/01English4
Quantitative Characterization of Hypoeutectic Aluminum–Silicon–Copper As-Cast Alloy Microstructures2016/09/06English3
Local Film Boiling and Its Impact on Distortion of Spur Gears During Batch Quenching2012/10/01English3
Experimental Evaluation of Tool Steel Fracture Toughness Using Circumferentially Notched and Precracked Tension Bar Specimen2014/01/31English2
Cooling Capacity of Petroleum Oil Quenchants as a Function of Bath Temperature2013/12/13English2
Real and Effective Heat Transfer Coefficients (HTCs) Used for Computer Simulation of Transient Nucleate Boiling Processes during Quenching2012/07/01English2
Experimental Investigation of the Effect of Polyisobutilene Additives to Mineral Oil on Cooling Characteristics2016/05/13English2
Microstructure of a Heat Treated Nickel-Aluminum Bronze and Its Corrosion Behavior in Simulated Fresh and Sea Water2016/08/11English1
Comparative Impact Behavior of High-C Steel After Conventional Quenching, Tempering, and Austempering2016/08/26English1
Simulation of Microtextured Surfaces in Starved EHL Contacts Using Commercial FE Software2017/01/30English1
Analysis of the Textured Surface of Tangential Turn-Milling2017/01/30English1
Influence of Different Micro-Imprints to Fatigue Life of Components2017/01/30English1
Design and Tribological Performance of Textured Surfaces2017/01/30English1
Slip-Rolling Resistance and Load Carrying Capacity of 36NiCrMoV1-5-7 Steel2014/09/18English1
Cooling Capacity of Coconut Oil, Palm Oil, and a Commercial Petroleum Oil by Solving the Heat Conductivity Inverse Problem2013/09/13English1
Is There Possible Bias in ASTM E112 Planimetric Grain Size Measurements?2013/06/27English1
Studies on Temperature Distribution in Electromagnetic Welding Process2012/09/01English1
Modeling the Carbonitriding of Steel2012/09/01English1
Investigation of Toughening Micro-Mechanisms in Polypropylene/Ethylene-Propylene-Diene Rubber Blends at Crack and Notch Tips2014/03/26English1
Analytical Solution of the Problem of Diffusional Transformation Under Continuous Cooling Condition Based on Isothermal Transformation Diagram Data2013/04/17English1
The Influence of Quenching and Aging on Fracture Toughness of the Al-Zn-Mg-Cu Alloy 74492014/06/07English1
Influence of Soaking Temperature and Time on Microstructure and Mechanical Properties of Water Quenched Zr–2.5Nb Alloy2014/06/23English1
Cooling Performance of Select Mineral Oil and Polymer Quenchants2014/05/13English1
Effects of Hollow Fly-Ash Particles on the Properties of Magnesium Matrix Syntactic Foams: A Review2016/03/21English1
Vegetable Oils as Metal Quenchants: A Comprehensive Review2017/06/13English1
Tracking Interphases in Directionally Solidified Zn-Al Binary Alloys2012/09/01English
Depth Profiling of Residual Stress for Shot-Peened “U”-Bend Alloy-800 Tubes for the PHWR Steam Generator2014/01/17English
Notch Effect and Fatigue Performance of Ti-6Al-4 V Sheets in Saline Environment2014/01/16English
Effect of Notch Orientation on Fracture Toughness of a Submerged Arc Weld2014/01/17English