Title	Publication Date	Language	Citations
Structure and properties of selected cemented carbides and cermets covered with TiN/(Ti,Al,Si)N/TiN coatings obtained by the cathodic arc evaporation process	2005/06/01		1
Performance of a Venturi scrubber in the removal of fine powder from a confined gas stream	2005/06/01		1
Characterization of cure of carbon/epoxy prepreg used in aerospace field	2005/09/01		1
Pechini synthesis and microstructure of nickel-doped copper chromites	2005/06/01		1
Study of the nature of non-metallic inclusions in samples of aluminum and silicon killed low carbon steels, collected in the refining treatment and continuous casting stages	2004/12/01		1
Zeta potential measurement in bioactive collagen	2004/12/01		1
Characterization and thermal behavior of polymer-modified asphalt	2004/12/01		1
Morphology and stress study of nanostructured porous silicon as a substrate for PbTe thin films growth by electrochemical process	2004/12/01		1
Sintering of Ni-Zn ferrite nanopowders by the constant heating rate (CHR) method	2004/12/01		1
Bentonites from Boa Vista, Brazil: physical, mineralogical and rheological properties	2004/12/01		1
Nanomechanical properties of rough surfaces	2006/06/01		1
Determination of non-isothermal crystallization rate constant for pseudo-experimental calorimetric data	2009/06/01		1
Inhomogeneous Poisson point process nucleation: comparison of analytical solution with cellular automata simulation	2009/06/01		1
Sintering behavior of LZSA glass-ceramics	2009/06/01		1
A comparative study of mechanical and tribological properties of AISI-304 and AISI-316 submitted to glow discharge nitriding	2009/06/01		1
Quality and intensity of the tissue response to two synthetic granular hydroxyapatite implanted in critical defects of rat calvaria	2009/06/01		1
The effect of weld geometry and post-weld heat treatment on the corrosion behaviour of austenitic stainless steel immersed in 1.0 M NaCl solution	2010/03/01		1
Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys	2010/12/01		1
Workability studies on cold upsetting of sintered copper alloy preforms	2010/12/01		1
Stabilization of electric-arc furnace dust in concrete	2010/12/01		1
Processing of high performance composites based on peek by aqueous suspension prepregging	2010/06/01		1
EValuation of the thixoformability of AA7004 and AA7075 alloys	2010/09/01		1
Surface roughness and hardness of a composite resin: influence of finishing and polishing and immersion methods	2010/09/01		1
Measuring and Modeling the Plasticity of Clays	2010/09/01		1
Heat treatments and thermomechanical cycling influences on the R-phase in Ti-Ni shape memory alloys	2010/09/01		1
Abrasive blasting contamination in Super Duplex and carbon steels - a quantification approach by rietveld analysis	2014/10/01		1
Experimental research on the effect of induction reheating on the microstructure and mechanical properties of hot-rolled low-alloy steel plate	2014/12/01		1
Thermal inkjet printing of copper tetrasulfonated phthalocyanine (CuTsPc) as a semiconducting layer on flexible MIS capacitors	2014/12/01		1
A positron annihilation study of ZnO prepared by thermal oxidation at different temperatures	2014/12/01		1
Oxygen Permeability Coefficient of High Density Polyethylene/Cu Nanofibers Nanocomposites below Percolation	2015/10/01		1